DX6i Programming when?

[Steven57]

Do you program the DX6i to your helicopter and then bind it? Or do you bind first?
Thanks
MCX2 and 120SR just waiting to bind.

[Pfloyd]

I usually program it first then bind it...

[Steven57]

Thanks. I'm using the setting that you posted for the MCX2 and the 120SR. Reference: MCX2 , is the throttle curve defaulted to the G/F Mode? Why are you doing D/R on the Elev D/R vs both on G/F Mode like the 120SR?

Lastly, at least for today, the 120SR blades were very easy to pivot and would smack the stabilizer on spool up. I snugged up the blade holder screws so the blades weren't so floppy. They still move with some resistance. Does that seem ok to you?

Thanks again.

[dontrinko]

the 120sr blades should rotate easily in the holders. Make sure nothing is broke or bent on the flybar and blades. Normally as the flybar moves it moves the blades and they should not touch. Don

[Pfloyd]

I have mine tight where I can move then with my finger.

[Steven57]

and the binding question Pfloyd?

[Pfloyd]

I already answered that in the second post. I program my DX6i first then bind the heli.

[Steven57]

sorry, meant what I posted above.

Thanks. I'm using the setting that you posted for the MCX2 and the 120SR. Reference: MCX2 , is the throttle curve defaulted to the G/F Mode? Why are you doing D/R on the Elev D/R vs both on G/F Mode like the 120SR?