START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
600 Class Electric Helicopters 600 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
05-02-2007, 12:29 PM | #1 (permalink) |
Registered Users
|
1512/1.5y an option?
Greetings,
I can't seem to get a 1515/2.5D/F anywhere, so I was wondering if the 1512/1.5Y was a good choice for 6S. I have been without a motor for 11 days and I need to do something quick. I've gone round and round trying to get my 3 flight 600XL replaced through my LHS, but he claims they are on backorder. Thanks, Clarence |
Sponsored Links | |||
Advertisement |
|
05-02-2007, 01:44 PM | #2 (permalink) |
Registered Users
Join Date: Dec 2006
|
Hi Clarence,
I guess it depends a little on what type of flying you are going to be doing. I am flying with the Neu 1512/1.5 Y/F on 6s and I am perfectly happy with this setup but I am not by any means a 3d guru. It is also the lightest option from Neu if I am not mistaken. Hope this helps, Serge |
05-02-2007, 03:35 PM | #3 (permalink) |
Registered Users
Join Date: Jun 2006
|
correct , depending on what flying you do it could be a viable option . I run the 1515/2.5D/F , VERY STRONG MOTOR, stronger than the 600l and 600XL motors IMHO :wink: .... but at the expense of flight time , i get 5 min of 3D. the 1512/1.5Y/F while not quite as strong as the 1515 is very capable and is IMO stronger than the 600L motor and it will do 3D very easiny and also give you a slightly longer flight time because of it's weight and uses less Amps.... several people have commented that they like this setup.... you won't be dissapointed with either motor... :wink:
|
05-02-2007, 04:08 PM | #4 (permalink) | |
HF Support
Join Date: Sep 2006
|
Quote:
__________________
John |
|
05-02-2007, 04:19 PM | #5 (permalink) | ||
Registered Users
Join Date: Jun 2006
|
Quote:
|
||
05-02-2007, 04:28 PM | #6 (permalink) |
Registered Users
Join Date: Nov 2006
|
If i remember correctly the 1512/1.5Y should give around 2300HS using a 10T straight pinion. Do the motor tends to bog down heavily under load or can it maintain (decent) headspeed ? What about heat ? Is is as good as the 1515 is reported to be, where overheating is more or less non existing ?
__________________
T-Rex 650 CF / Scorpion 4025-630, 12SJive 80+HV,2 x TP 3300 6S V2, Radix 710SB,Super Stubz,Futaba 9451,Spartan DS760/BLS251.Quick UK swash and tail T-Rex 700N, OS 91HZ, Hatori 939, Radix 710SB, BLS 451, 9254 for throttle, Spartan DS760/BLS251, Quick UK tail, |
05-02-2007, 05:13 PM | #7 (permalink) |
Registered Users
Join Date: Jun 2006
|
the 1512 doesnt bog as much as the 600L but more than the 1515 , still gives a good HS during Maneuvers, Heat isn't an issue from what i've heard...
|
05-02-2007, 09:38 PM | #8 (permalink) |
Registered Users
Thread Starter
|
Thanks for all of the replies. I decided to go with the 1515/2.5D/F. I ordered one from amainhobbies.com and it should be here in 2 days.
Thanks, Clarence
__________________
Team Kontronik Team minicopter VTeam Team YS, Team RoToR Rage Evo Power Battery PeakAircraft |
Thread Tools | |
Display Modes | |
|
|