Atom 500/5.5 add fbl 225 shipped

[quinn]

I have a complete atom 500 with align ds515 cyclics, full size ds655 tail mounted on boom for balancing bigger lipos, castle ice 100 esc (plenty big enough to run any motor you want) , gryphon Polaris bec, stock compass 1050kv motor with 10t pinion, hobbywing rpm sensor for external gov, zeal 430mm blades, fusuno 5.5 canopy.

I will also be including all the parts needed to stretch it to the 5.5. (Longer boom, belt, and rotortechs 515 blades) I don't have the stock tail pushrod for either 500 or 5.5 setup. My boom mount with shorter carbon rod will work for either setup. If you want the servo mounted back in the frame you will need to get a longer pushrod.
I have some spare parts including main gear, spindles, tail shafts, grip arms, links, bearings, one way, tail servo gears, and some other miscellaneous stuff.

The heli is not in perfect shape and the price reflects that, but it is in good flying condition and was solid the last time I flew it.

I will try to be as detailed as I can with any issues it may have. First of all, the canopy is a bit beat up but functional, the tail boom has a small dent from a tip over/ slow boom strike. One of the grip arms had one stripped screw when I bought it but put it back in with red loctite and had no issues last couple hundred flights. The esc was giving me some issues with the internal bec while driving all servos so I added the gryphon bec. The servo wires have been shortened and recrimped so are just long enough to hook up to the ikon I had installed. For a while I had it setup as the 5.5 with a scorpion 4025 which was insane but it had so much torque that it cracked the frame between the motor mount and bearing block, so I added doubled up carbon plates on either side that bolt on (see pics). It's now stronger than stock and will handle a monster motor no problem. If you are interested in putting a 4025 in it, I have one of those I would also sell. The 100 amp esc handles it no problem. I currently have xt150 bullets on the esc (without plastic housing) so you will probably want to replace those.

I would keep it and fly it, but I just don't have time for it anymore since I have bigger helis. Also I need to save for a generator. If I think of anything else, I will add it. The rotortechs are not in the pics because they are at work but I will add them in the pics tomorrow.

250 paypal shipped usps conus

[quinn]

Price drop 275 shipped.

[quinn]

Price drop 250 shipped

[quinn]

bump

[quinn]

Bump

[benddg]

Clear your PM's

[quinn]

Price drop 225 shipped.

Awesome beater heli for learning new stuff. Cheap to fix, easy to work on. I know everyone is scared of compass because of parts supply rumors, but look on prostar yourself, everything is in stock.
http://www.prostarhobby.com/mobile/C...y.aspx?id=1868