Register Now

icehunter · 07-07-2017, 09:14 PM

A question folks. What CF blades are you guys using on the ol 400? I just picked up my 4th one ( I is catching up to you Brokedad!!

) an doing this one up. I have one set of e-flte CF main blades but cant find any e-flite tail blades. I am ordering random sets from a few different places that might work. All these are still flybarred, so more for easy flyin , then anything. So lets say mains and tail blades.

Suggestions..

BrokeDad · 07-08-2017, 08:04 AM

I use the cheap 325mm ones from Banggood. I fly mostly the fiberglass ones. Here's some for $5.49 US. You will see others listed in the side bars.

https://www.banggood.com/Aglin-TREX-...ft-hotproducts

Here's CF for $6.91:

https://www.banggood.com/Tarot-450-R...ft-hotproducts

Here's some CF tail blades for $3.62:

https://www.banggood.com/Tarot-450-3...ft-hotproducts

icehunter · 07-08-2017, 01:40 PM

Thanks Brokedad. I was wondering about bang good, so I will do a small shopping spree right quick.

Any others you folks can suggest??

FR4-Pilot · 07-10-2017, 10:06 PM

I've had good luck with various Align 325s:
https://www.amainhobbies.com/align-3...hd320f/p292629

https://www.amainhobbies.com/align-3...hd320e/p492996

However, it seems with any blades other than the stock woodies you'll have to use (or construct) two spacers for each blade as most are thinner at the root. Old credit cards work great.

-John

07-07-2017, 09:14 PM	#1 (permalink)
icehunter Registered Users Join Date: Mar 2010	Which CF blades work?? A question folks. What CF blades are you guys using on the ol 400? I just picked up my 4th one ( I is catching up to you Brokedad!! ) an doing this one up. I have one set of e-flte CF main blades but cant find any e-flite tail blades. I am ordering random sets from a few different places that might work. All these are still flybarred, so more for easy flyin , then anything. So lets say mains and tail blades. Suggestions.. __________________ --------------------------------------------------------------- Blade CX2 (x2) 120SR, CP Pro2,230S Huey, 400 3D (X2), 450 3D (x2), T-Rex 450 sport, T-Rex 450Pro DFC, T-Rex Scale 450 size x4 , T-Rex 470LM ,T-Rex 500 ESP, T-Rex 600N, Fireball.

07-08-2017, 01:40 PM	#3 (permalink)
icehunter Registered Users Thread Starter Join Date: Mar 2010	Thanks Brokedad. I was wondering about bang good, so I will do a small shopping spree right quick. Any others you folks can suggest?? __________________ --------------------------------------------------------------- Blade CX2 (x2) 120SR, CP Pro2,230S Huey, 400 3D (X2), 450 3D (x2), T-Rex 450 sport, T-Rex 450Pro DFC, T-Rex Scale 450 size x4 , T-Rex 470LM ,T-Rex 500 ESP, T-Rex 600N, Fireball.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-08-2017, 08:04 AM	#2 (permalink)
BrokeDad Registered Users Join Date: Jun 2016 Location: -	I use the cheap 325mm ones from Banggood. I fly mostly the fiberglass ones. Here's some for $5.49 US. You will see others listed in the side bars. https://www.banggood.com/Aglin-TREX-...ft-hotproducts Here's CF for $6.91: https://www.banggood.com/Tarot-450-R...ft-hotproducts Here's some CF tail blades for $3.62: https://www.banggood.com/Tarot-450-3...ft-hotproducts

07-10-2017, 10:06 PM	#4 (permalink)
FR4-Pilot Registered Users Join Date: Mar 2009 Location: .	I've had good luck with various Align 325s: https://www.amainhobbies.com/align-3...hd320f/p292629 https://www.amainhobbies.com/align-3...hd320e/p492996 However, it seems with any blades other than the stock woodies you'll have to use (or construct) two spacers for each blade as most are thinner at the root. Old credit cards work great. -John

Register Now

Log-in