Register Now

Mega Stumbler · 01-17-2012, 04:18 PM

I love soldering. The smaller and harder the better. If you have a busted 3n1 that you want to make a few bucks from, then send me a line. I will buy it from you.

I will also repair them and send them back to you for minimum cost.

Mega Stumbler · 01-18-2012, 09:46 PM

TTT!

Mega Stumbler · 01-19-2012, 06:18 PM

Thank you to those that have sold me your boards, but that is still not enough to feed my desire to melt metal and fix things.

I'll take boards with missing connectors, chips, wires, antennas.

I'll even take boards that will not bind. Just give me an offer.

LandenTD · 01-19-2012, 10:06 PM

I broke the tube going to the tail rotor on mine. Could you install a new one for me? I'll pay. Might be something to solder... I would like it brushless if you can facilitate that. Again, just give me a cost

Todd
todd.landen@us.army.mil

Mega Stumbler · 01-20-2012, 05:40 PM

I couldn't charge you to do something like that. For that you just pick up a new tail motor assembly at your local hobby shop or an online retailer. Use that Army strong strength to pull out the old busted boom and then slide in the new one. Easy peasy. I think there is even a video on the horizon hobby website.

Aim High! - Oh, thats my saying, not yours. Oops.

Whopper Chopper · 01-20-2012, 10:16 PM

Hw much would you charge to solder a tail FET (I have) and a 10k resistor (you have)?

Jskrapper · 01-21-2012, 03:02 PM

How much do you pay? I have five of them. Some are missing battery leads, and some are missing more than one FET and some have been tried to be fixed.

Mega Stumbler · 01-21-2012, 03:34 PM

I give $10 each for boards in any condition except for a board that has been robbed of all its parts and physically broken boards.

808Hanapaa · 01-22-2012, 12:02 PM

Do you accept Esky 4in1 ? I have a 72mhz that has been fried. I think the diodes need to be replaced but my soldering skills for tiny things aren't great.

Thanks

Mega Stumbler · 01-22-2012, 02:59 PM

I wish I could, but I can't. I don't have a test bird to fly the repaired card in. I also do not have a golden sample for the e sky. Maybe soon, if I am able to get more birds in my hanger but right now I am limited to MCX 2s and MCP Xs.

EclipseSL94 · 01-22-2012, 06:28 PM

I have one. Sent you a pm.

Mega Stumbler · 01-24-2012, 06:42 PM

Thank you Eclipse.

I'm still looking for some more everybody.

ttt!

Sent from my DROIDX using Tapatalk

Mega Stumbler · 02-02-2012, 11:16 AM

ttt

Sent from my DROIDX using Tapatalk

Mega Stumbler · 02-04-2012, 09:37 AM

my work bench is empty

. I need more projects. some people do mma. Some people go to the gym, some fly their birds, some hit the bottle. I find my peace fixing small electronics. Help me find me peace.

I want your broken circuit boards from eFlite birds. Send me a line if you want to sell your junk.

Sent from my DROIDX using Tapatalk

Mega Stumbler · 02-05-2012, 08:38 PM

Still looking.

davidvm3 · 02-06-2012, 12:47 AM

Do you have an ad in the rc.runryder forums? Might be a good idea

Mega Stumbler · 02-06-2012, 08:39 AM

No, I don't. I mainly spend all my time on helifreak because I really like the sites organization and the people on here. I will check it out though.

birchbore · 02-07-2012, 02:47 PM

i have one. it has a long interval led flash but no steady flash. wont bind

Mega Stumbler · 02-07-2012, 05:02 PM

I would love to take a look at it. I sent you a PM.

Mega Stumbler · 02-10-2012, 07:50 PM

bump

Sent from my DROIDX using Tapatalk

01-17-2012, 04:18 PM	#1 (permalink)
Mega Stumbler Registered Users My HF Map location Join Date: Aug 2011	WTB your busted MCPX 3n1 I love soldering. The smaller and harder the better. If you have a busted 3n1 that you want to make a few bucks from, then send me a line. I will buy it from you. I will also repair them and send them back to you for minimum cost. Last edited by Mega Stumbler; 01-18-2012 at 09:45 PM..

01-21-2012, 03:02 PM	#7 (permalink)
Jskrapper Registered Users My HF Map location Join Date: Nov 2009	How much do you pay? I have five of them. Some are missing battery leads, and some are missing more than one FET and some have been tried to be fixed. __________________ -Joe "Helis - wallet weight reduction made easy" HeliArt Jskrapper @ youtube

01-21-2012, 03:34 PM	#8 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	I give $10 each for boards in any condition except for a board that has been robbed of all its parts and physically broken boards. Last edited by Mega Stumbler; 01-21-2012 at 04:29 PM.. Reason: Clarification

02-07-2012, 02:47 PM	#18 (permalink)
birchbore Registered Users Join Date: Feb 2011	3n1 i have one. it has a long interval led flash but no steady flash. wont bind

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2012, 09:46 PM	#2 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	TTT!

01-19-2012, 06:18 PM	#3 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	Thank you to those that have sold me your boards, but that is still not enough to feed my desire to melt metal and fix things. I'll take boards with missing connectors, chips, wires, antennas. I'll even take boards that will not bind. Just give me an offer.

01-19-2012, 10:06 PM	#4 (permalink)
LandenTD Registered Users Join Date: Feb 2010	I broke the tube going to the tail rotor on mine. Could you install a new one for me? I'll pay. Might be something to solder... I would like it brushless if you can facilitate that. Again, just give me a cost Todd todd.landen@us.army.mil

01-20-2012, 05:40 PM	#5 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	I couldn't charge you to do something like that. For that you just pick up a new tail motor assembly at your local hobby shop or an online retailer. Use that Army strong strength to pull out the old busted boom and then slide in the new one. Easy peasy. I think there is even a video on the horizon hobby website. Aim High! - Oh, thats my saying, not yours. Oops.

01-20-2012, 10:16 PM	#6 (permalink)
Whopper Chopper Registered Users Join Date: Jan 2007	Hw much would you charge to solder a tail FET (I have) and a 10k resistor (you have)?

01-22-2012, 12:02 PM	#9 (permalink)
808Hanapaa Registered Users Join Date: Oct 2011	Do you accept Esky 4in1 ? I have a 72mhz that has been fried. I think the diodes need to be replaced but my soldering skills for tiny things aren't great. Thanks

01-22-2012, 02:59 PM	#10 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	I wish I could, but I can't. I don't have a test bird to fly the repaired card in. I also do not have a golden sample for the e sky. Maybe soon, if I am able to get more birds in my hanger but right now I am limited to MCX 2s and MCP Xs.

01-22-2012, 06:28 PM	#11 (permalink)
EclipseSL94 Registered Users Join Date: Dec 2011	I have one. Sent you a pm.

01-24-2012, 06:42 PM	#12 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	Thank you Eclipse. I'm still looking for some more everybody. ttt! Sent from my DROIDX using Tapatalk

02-02-2012, 11:16 AM	#13 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	ttt Sent from my DROIDX using Tapatalk

02-04-2012, 09:37 AM	#14 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	my work bench is empty . I need more projects. some people do mma. Some people go to the gym, some fly their birds, some hit the bottle. I find my peace fixing small electronics. Help me find me peace. I want your broken circuit boards from eFlite birds. Send me a line if you want to sell your junk. Sent from my DROIDX using Tapatalk

02-05-2012, 08:38 PM	#15 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	Still looking.

02-06-2012, 12:47 AM	#16 (permalink)
davidvm3 Registered Users Join Date: Dec 2011	Do you have an ad in the rc.runryder forums? Might be a good idea

02-06-2012, 08:39 AM	#17 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	No, I don't. I mainly spend all my time on helifreak because I really like the sites organization and the people on here. I will check it out though.

02-07-2012, 05:02 PM	#19 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	I would love to take a look at it. I sent you a PM.

02-10-2012, 07:50 PM	#20 (permalink)
Mega Stumbler Registered Users Thread Starter My HF Map location Join Date: Aug 2011	bump Sent from my DROIDX using Tapatalk

Register Now

Log-in