Register Now

lklansingkiter@me.com · 04-16-2012, 09:00 AM

I am putting together a 6hv with DS610 servos and am a little perturbed by the available mounting hardware. The mounting hardware that comes with the servo is designed to be used with the rubber grommets and brass inserts . The hardware with the 6hv is designed for a screw that is way to small for the servo tab hole to be used straight with a washer to press down the tab but with no provision to stop any slop if the servo should be forced to move within the mount. It seems like no one uses the rubber grommet system on a heli that the servo was designed for. I feel like such an important mounting procedure is being jury-rigged and I was wondering if this is ever a problem or if there is a better solution.

TheBum · 04-16-2012, 12:44 PM

The vibrations are low enough on an electric that rubber grommet mounting is not needed. Using the grommets always has the potential to cause the servo to wobble in the frame, especially with the amount of torque needed for a FBL head.

Andy.Kim · 04-17-2012, 09:30 PM

I don't use rubber grommets or the brass fitting. No issues here

Larry227 · 04-18-2012, 10:07 AM

I'm running the 610s and not using the grommets or sleeves. They work great. Yours will be fine.

TallPaul · 04-18-2012, 11:48 AM

Quote:

Originally Posted by Andy.Kim

I don't use rubber grommets or the brass fitting. No issues here

Andy - do you have any video of you flying - this statement becomes VERY powerful once they see how you fly.

jt45255 · 04-18-2012, 01:37 PM

+1

Quote:

Originally Posted by Andy.Kim

I don't use rubber grommets or the brass fitting. No issues here

Andy.Kim · 04-19-2012, 02:01 AM

Quote:

Originally Posted by TallPaul

Andy - do you have any video of you flying - this statement becomes VERY powerful once they see how you fly.

I do. This was at the beginning of last year's season
[ame]http://www.youtube.com/watch?v=o15EbCiN3Ao[/ame]

lklansingkiter@me.com · 04-19-2012, 07:43 AM

Ok my next question is what servo arms do you use on this. The guy I bought the heli from
ANDYZBOY left the horns on the pushrods for me and said he was using Align servos. When I go to put the arms on the servos they don't slip on like I am use to with other servos. They could be forced on and then pushed in further with the screw but I am not sure this is right.
The horns are white plastic and fairly stout. What horns should I be using for ds610 servos?

TheBum · 04-19-2012, 08:34 AM

Those were probably the stock Compass arms. Yes, they're tight, but the way I look at it is that you get no slop. I'm running them on my 6HV with Futaba S9452 servos (same spline as the DS610).

lklansingkiter@me.com · 04-19-2012, 03:12 PM

just figured out that these are the JR arms and thats why they don't fit . I ordered the FU arms from Nankin.

TheBum · 04-19-2012, 03:58 PM

Quote:

Originally Posted by lklansingkiter@me.com

just figured out that these are the JR arms and thats why they don't fit . I ordered the FU arms from Nankin.

That would explain it. Why JR and Hitec couldn't use the Futaba spline is beyond me. Every other servo manufacturer does.

Andyzboy · 04-20-2012, 06:50 PM

I was using 610's, those arms should definitely be the right ones.Unless I had the wrong arms on there, but they did fit on mine with little effort.

Edit: I guess I did have the wrong arms on, that was dumb...

Rob43 · 04-20-2012, 08:51 PM

Quote:

Originally Posted by Andy.Kim

I do. This was at the beginning of last year's season
http://www.youtube.com/watch?v=o15EbCiN3Ao

Where those sounds of SWE protest?

Andy.Kim · 04-20-2012, 10:53 PM

Quote:

Originally Posted by Rob43

Where those sounds of SWE protest?

yes they were. 630mm. They're ok. I got them from a friend to try out. They're pretty flexible.

04-16-2012, 09:00 AM	#1 (permalink)
lklansingkiter@me.com Registered Users Join Date: Jul 2011	DS610 mounting question I am putting together a 6hv with DS610 servos and am a little perturbed by the available mounting hardware. The mounting hardware that comes with the servo is designed to be used with the rubber grommets and brass inserts . The hardware with the 6hv is designed for a screw that is way to small for the servo tab hole to be used straight with a washer to press down the tab but with no provision to stop any slop if the servo should be forced to move within the mount. It seems like no one uses the rubber grommet system on a heli that the servo was designed for. I feel like such an important mounting procedure is being jury-rigged and I was wondering if this is ever a problem or if there is a better solution.

04-16-2012, 12:44 PM	#2 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	The vibrations are low enough on an electric that rubber grommet mounting is not needed. Using the grommets always has the potential to cause the servo to wobble in the frame, especially with the amount of torque needed for a FBL head. __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

04-18-2012, 10:07 AM	#4 (permalink)
Larry227 Registered Users My HF Map location Join Date: Jul 2008	I'm running the 610s and not using the grommets or sleeves. They work great. Yours will be fine. __________________ Trex 700 Pro DFC - Compass 6HV - Vcontrol - Neo #nodroneshere - 104

04-19-2012, 07:43 AM	#8 (permalink)
lklansingkiter@me.com Registered Users Thread Starter Join Date: Jul 2011	6hv servos Ok my next question is what servo arms do you use on this. The guy I bought the heli from ANDYZBOY left the horns on the pushrods for me and said he was using Align servos. When I go to put the arms on the servos they don't slip on like I am use to with other servos. They could be forced on and then pushed in further with the screw but I am not sure this is right. The horns are white plastic and fairly stout. What horns should I be using for ds610 servos?

04-19-2012, 08:34 AM	#9 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	Those were probably the stock Compass arms. Yes, they're tight, but the way I look at it is that you get no slop. I'm running them on my 6HV with Futaba S9452 servos (same spline as the DS610). __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

04-17-2012, 09:30 PM	#3 (permalink)
Andy.Kim Registered Users Join Date: Jan 2011	I don't use rubber grommets or the brass fitting. No issues here

04-19-2012, 03:12 PM	#10 (permalink)
lklansingkiter@me.com Registered Users Thread Starter Join Date: Jul 2011	just figured out that these are the JR arms and thats why they don't fit . I ordered the FU arms from Nankin.

04-20-2012, 06:50 PM	#12 (permalink)
Andyzboy Registered Users My HF Map location Join Date: Jan 2009	I was using 610's, those arms should definitely be the right ones.Unless I had the wrong arms on there, but they did fit on mine with little effort. Edit: I guess I did have the wrong arms on, that was dumb...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in