START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Mikado Logo Helicopters Mikado Logo Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
05-03-2012, 03:08 AM | #1 (permalink) |
Registered Users
Join Date: May 2010
|
Gens Ace packs for my Logo 400.
Hi All,
I have been hearing quite a lot of hype lately about Gens Ace Lipo packs. I see HobbyPartz finally have the Gens Ace 3300mah 6S1P 25C back in stock and I was thinking about ordering a few to try out. 1) First off are these packs OK for my setup? (Scorpion 4015-1070, Kontronik Jive 100LV, 19T mod 0.5 pinion and 500mm BBT Maniac blades) 2) Secondly do the Gens Ace packs really live up to all the hype? |
Sponsored Links | |||
Advertisement |
|
05-03-2012, 08:23 AM | #2 (permalink) |
Registered Users
|
Since getting gens ace for my logo 500 I miss shopping and researching lipo's. Get it?
6s 3300 for a logo 400 swinging 500mm blades might be too small. I would use bigger packs. 3800 or 4000 6s Sent from my iPad using Tapatalk HD |
05-04-2012, 12:43 AM | #3 (permalink) |
Registered Users
Join Date: Jan 2010
|
3300mah fit good and work great. I was using Edge 523mm blades (Logo 10 stretch) with a 2000w and getting 4:30min with 20% left. Head speed was 2200 as I far as I remember.
__________________
|
05-04-2012, 01:25 AM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: May 2010
|
Thanks guys, I'm going to give these a try.
My setup is similar to belcom's, just a little toned down and I'm getting 5 min on some old Zippy Flightmax 3000mah 20C packs so I'm hoping the 3300mah Gens Ace packs are going to give me a bit of a boost. Maarset what packs are you running in your 500? |
05-04-2012, 10:31 AM | #5 (permalink) |
Registered Users
|
i was using gensace 3300's on my 400 before i absolutely destroyed the helicopter.
|
05-04-2012, 10:51 AM | #6 (permalink) | |
Registered Users
|
Quote:
|
|
01-17-2013, 08:45 PM | #7 (permalink) |
Registered Users
|
I am researching for my next heli... I am looking for a heli that uses 6s 4000 packs. Looks like the Logo 400 will fit this bill?
__________________
Logo 690, Oxy 5, Synergy 516, Goblin 380, Oxy 3, multiple planks |
01-17-2013, 09:11 PM | #8 (permalink) |
Registered Users
|
Gens Ace packs for my Logo 400.
Be a tight fit. Logo 500 with 523's might be better.
Sent from my iPhone using Tapatalk |
01-18-2013, 12:47 AM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: May 2010
|
I also doubt 4000mah 6s packs are going to fit in a Logo 400.
I ordered some Gens Ace 3800mah packs for my Logo 400 and they won't fit without some cutting (they are an odd size though). About the biggest pack I managed to fit in my 400 where Hobby King Rhino 3800mah 6s packs. |
01-18-2013, 05:28 AM | #10 (permalink) |
Registered Users
Join Date: Jul 2008
|
I use 3300 pack's from Desirepower. Weight just below 500g.
__________________
LOGO 500 : Spartan Vortex Nano; Scorpion 4020 1100kV Quad 250 : Openpilot CC3D |
01-18-2013, 11:26 AM | #11 (permalink) |
Registered Users
Join Date: Dec 2007
|
I'm running the Thor 6S 3800 mAh on my L400 and there are a perfect fit.
http://www.readyheli.com/TH380045C6S...k_p_40323.html Ricci. Last edited by Ricci; 01-18-2013 at 12:47 PM.. |
Thread Tools | |
Display Modes | |
|
|