Register Now

brewer00psd · 04-21-2012, 01:29 PM

Hey guys.
Did a quick once over this week on my new mini. I have some slop between the main grips and the hub. Thought maybe when I put it together I had missed a spacer or something. Pulled it apart and I had originally assembled it per manual instructions. I went ahead and installed 1 more of the 6x8x.1 spacers on each side. I probably need about 4 more per side to take out the play.
Have any of you had this? What did you do?

Or are you flying it that way?
Thanks,
Matt

Click image for larger version

Name: uploadfromtaptalk1335032939435.jpg
Views: 136
Size: 46.0 KB
ID: 309930

Sent from my DROIDX using Tapatalk 2

Skyjacker07 · 04-21-2012, 01:31 PM

I've done a protos 500 fbl head the same way, didn't have any spacers to take up the space so I added my own to make it slop free.

brewer00psd · 04-21-2012, 01:36 PM

That's what I was thinking. Where did you put the spacers? In the middle of the hub or between the grip spacer and the dampeners?
Thanks
Matt

Sent from my DROIDX using Tapatalk 2

Skyjacker07 · 04-21-2012, 03:13 PM

I put mine behind the step washers in between those and the dampeners.

SMJT · 04-21-2012, 03:15 PM

Those blade grip spacers maybe odd sizes there should be 4 that come with the kit 2 for the flybar spindle and two thicker ones for the flybarless spindle have a look in your manual it should explain, alternative stack some preload washers in the hub before the dampers.

brewer00psd · 04-21-2012, 03:53 PM

Sounds good. Thanks for the info guys.
Matt

Sent from my DROIDX using Tapatalk 2

04-21-2012, 01:29 PM	#1 (permalink)
brewer00psd Registered Users Join Date: Sep 2011	I have an issue. Does your mini.... Hey guys. Did a quick once over this week on my new mini. I have some slop between the main grips and the hub. Thought maybe when I put it together I had missed a spacer or something. Pulled it apart and I had originally assembled it per manual instructions. I went ahead and installed 1 more of the 6x8x.1 spacers on each side. I probably need about 4 more per side to take out the play. Have any of you had this? What did you do? Or are you flying it that way? Thanks, Matt Sent from my DROIDX using Tapatalk 2 __________________ -----Just Fly Team Lynx

04-21-2012, 01:36 PM	#3 (permalink)
brewer00psd Registered Users Thread Starter Join Date: Sep 2011	That's what I was thinking. Where did you put the spacers? In the middle of the hub or between the grip spacer and the dampeners? Thanks Matt Sent from my DROIDX using Tapatalk 2 __________________ -----Just Fly Team Lynx

04-21-2012, 03:15 PM	#5 (permalink)
SMJT Registered Users Join Date: Jun 2011	Those blade grip spacers maybe odd sizes there should be 4 that come with the kit 2 for the flybar spindle and two thicker ones for the flybarless spindle have a look in your manual it should explain, alternative stack some preload washers in the hub before the dampers. __________________ SYNERGY 516 Mikado LOGO 550 Mikado LOGO 700

04-21-2012, 03:53 PM	#6 (permalink)
brewer00psd Registered Users Thread Starter Join Date: Sep 2011	Sounds good. Thanks for the info guys. Matt Sent from my DROIDX using Tapatalk 2 __________________ -----Just Fly Team Lynx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2012, 01:31 PM	#2 (permalink)
Skyjacker07 Registered Users Join Date: Dec 2010	I've done a protos 500 fbl head the same way, didn't have any spacers to take up the space so I added my own to make it slop free.

04-21-2012, 03:13 PM	#4 (permalink)
Skyjacker07 Registered Users Join Date: Dec 2010	I put mine behind the step washers in between those and the dampeners.

Register Now

Log-in