MSR, MCPX Pitch Guage?

[hb1201]

Hey guys, is there a small pitch guage for these little helis? I ordered the Blade El1000 or whatever it was, and it is to big?
Thanks for your help!

[Pfloyd]

Don't need a pitch gage for the msr/msrx. They are fixed pitched helis.

[JonJet]

You do not need a pitch gauge for the mCPX either...just adjust the servo rods so the swash is level, then adjust the pos/neg pitch balance so it's equal...(if you need more pos pitch, lengthen each servo rod...for added neg pitch, shorten them)

When the tip of the blades folded back over the boom is equal distance for both pos and neg, you know you have it set correctly

If you experience tail blowout, simply adjust the pitch servo travel downward 5 points at a time until you eliminate the blowout at full collective

Mine all run between 75% and 90% servo travel, depending on the main motor power and battery

[hb1201]

Oh! That makes sense.
Thank you very much for your replies!