Walkera V450 servo alternatives

[nighttrain06]

I aquired a V450DO3 that needs ESC motor, servos.
Plan on replacing with stock motor, but differen't ESC servo's.
Does anyone know what servo's might be compatible, figure I'll just go with something like a Hobby Wing ESC, and have been reading
that the KDS n 290 servo's would fit with some modifications.
Anyone have an answer for how much modding I'd need to do??

[helibeli]

You'll find videos on you tube on how to modify the frame slightly.The kds servos are ok for the receiver.The rx-2703h receiver/6 axis gyro is a superb bit of kit but will only work with 65 Hz servos,anything else won't work.I bought this heli second hand and it's the most stable heli I've tried,I converted a copter-x 500 to work with the receiver using 4 of the 2601 servos and it works.

[helibeli]

Any digital 333hz works so long as they physically fit.

[SalomonM]

Did you find a good alternative to the stock servo on the V450D03? that I can get without having to make mods.

[helibeli]

I'm still using the original servos on mine with no problems(probably because of my non violent style of flying).Sooner or later all Walkera parts will dry up and you'll have to make small mods to the frame to make alternatives fit.Emax servos are economical and work well.On my copter-x 450 I have 3 ES08MD11 metal gear 12g 1.6Kg 0.12 sec servos on cyclic and Es9258 25g 2.5Kg 0.08sec on the tail.I see no reason why these can't be used on the Walkera with maybe slight filing of the frame.I've seen videos of the KDSn290 fitted as well.