Register Now

shay3k3 · 09-19-2015, 05:15 PM

Someone have any experience with those blades?
And what do you think she'll I test them?

DCflyer · 09-19-2015, 10:38 PM

Personally, I wouldn't touch those with a 10ft pole. There are plenty of good blades out there for $20-$30 more. Thats nothing compared to the overall cost of the machine. And the blades are arguably the most important component on the heli. At the end of the day its your choice, but i'd ask myself.........is it really worth the risk?

Raz0rSh4rp · 09-20-2015, 12:05 PM

Looks like an RJX clone...

shay3k3 · 09-20-2015, 05:11 PM

I know that some clones work good but I'm not sure if I'll should test them.

N3M0 · 09-22-2015, 04:50 PM

Budget may be tight, but for 60$ you can get a decent pair of blades from RJX, Align, Zeal. And you wont have to worry about QC issues and possible injury. Blades are Important, they must be in very good condition or severe injury or death may occur. I would shy on the side of quality over price on this decision.

SumOFparts · 09-22-2015, 07:59 PM

Ah BS - for learner/trainer blades - if you balance and set the CG - I'd give em a go......if your asking this question - your most likely not a 'throw down pro' !!

Make you appreciate the good ones when they come along....

-

shay3k3 · 09-23-2015, 01:57 PM

I fly for 2 years and I fly hard 3d
Just see the sell on eBay and wanted to know if someone use them I didn't buy them though thanks for answer

09-19-2015, 05:15 PM	#1 (permalink)
shay3k3 Registered Users Join Date: Dec 2014	550 blades information Someone have any experience with those blades? And what do you think she'll I test them?

09-19-2015, 10:38 PM	#2 (permalink)
DCflyer Registered Users Join Date: Jan 2013 Location: DC	Personally, I wouldn't touch those with a 10ft pole. There are plenty of good blades out there for $20-$30 more. Thats nothing compared to the overall cost of the machine. And the blades are arguably the most important component on the heli. At the end of the day its your choice, but i'd ask myself.........is it really worth the risk? __________________ OXY5 MEG / 12S RAW KSE / 14S TDSF / 6S OXY rep

09-20-2015, 12:05 PM	#3 (permalink)
Raz0rSh4rp Registered Users Join Date: Mar 2012	Looks like an RJX clone... __________________ NX4\|Tri-Chronos\|Chronos\|7NT\|Specter700 Saje Marvin - Citizen 125

09-22-2015, 07:59 PM	#6 (permalink)
SumOFparts Registered Users Join Date: Mar 2013	Ah BS - for learner/trainer blades - if you balance and set the CG - I'd give em a go......if your asking this question - your most likely not a 'throw down pro' !! Make you appreciate the good ones when they come along.... - __________________ Reach farther...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-20-2015, 05:11 PM	#4 (permalink)
shay3k3 Registered Users Thread Starter Join Date: Dec 2014	I know that some clones work good but I'm not sure if I'll should test them.

09-22-2015, 04:50 PM	#5 (permalink)
N3M0 Registered Users My HF Map location Join Date: Jun 2011	Budget may be tight, but for 60$ you can get a decent pair of blades from RJX, Align, Zeal. And you wont have to worry about QC issues and possible injury. Blades are Important, they must be in very good condition or severe injury or death may occur. I would shy on the side of quality over price on this decision.

09-23-2015, 01:57 PM	#7 (permalink)
shay3k3 Registered Users Thread Starter Join Date: Dec 2014	I fly for 2 years and I fly hard 3d Just see the sell on eBay and wanted to know if someone use them I didn't buy them though thanks for answer

Register Now

Log-in