Register Now

novicepilot · 04-30-2013, 09:08 PM

Hey Guys,

I recently bought a used fury 55 i am converting it to FBL I watched Finless Bobs build Video and Was stuck on how they mounted the Gyro So i made a plate out of Carbon fiber and 2 Flat sided frame spacers and mounted it right in front of the clutch bell housing just wondering do i need to worry about vibration issues with the sensor being so close to the motor and Advice would be greatly appreciated.

novicepilot · 04-30-2013, 09:09 PM

BTW i am running a Fullsize V-Bar

jhamel · 05-01-2013, 01:57 AM

If you are using the VBar Silverline, vibrations should not be an issue.

ChapaWolf · 05-29-2013, 10:25 PM

MA makes a front gyro mount for the Fury. I am using the CGY750. I moved the sensor up front and the controller to the rear gyro plate. As far as function I think it works better but also I don't have to remove my canopy to adjust the setting

Pvtzemerak · 05-30-2013, 11:08 AM

I have yet to use the Vbar sensor up front. I have 13 flights or so logged with the sensor near the tail. I'm wondering if there is any noticable improvements when mounting it upfront.
--Brian

04-30-2013, 09:08 PM	#1 (permalink)
novicepilot Registered Users Join Date: Jan 2012	Mounting V-Bar sensor up front ? Hey Guys, I recently bought a used fury 55 i am converting it to FBL I watched Finless Bobs build Video and Was stuck on how they mounted the Gyro So i made a plate out of Carbon fiber and 2 Flat sided frame spacers and mounted it right in front of the clutch bell housing just wondering do i need to worry about vibration issues with the sensor being so close to the motor and Advice would be greatly appreciated.

05-01-2013, 01:57 AM	#3 (permalink)
jhamel Registered Users Join Date: Mar 2011 Location: West Seattle, WA, USA	If you are using the VBar Silverline, vibrations should not be an issue. __________________ 14S Specter 700 V2 NME/Tron 7/Kraken; 8S Tron Dnamic; 7S Kraken 580; 6S Buddy 380 KSE VBCE/Neo/EVO, Jeti/Spirit, YGE "T" ESCs; LiFePO4 field charging batteries Sims on Mac: Heli-X, neXt, AccuRC, Phoenix, AeroFly RC7 Ultimate Amain Team Pilot

05-30-2013, 11:08 AM	#5 (permalink)
Pvtzemerak Registered Users Join Date: Nov 2008	I have yet to use the Vbar sensor up front. I have 13 flights or so logged with the sensor near the tail. I'm wondering if there is any noticable improvements when mounting it upfront. --Brian __________________ WHIPLASH 730E\| EGODRIFT 4530 525Kv \| HOBBYWING 200A \| GDW CYCLIC \| TORQ TAIL \| RAIL 717mm \| VBAR XLPOWER 550I HOBBYWING 120A I TORQ SERVOS I RAIL 556mm I VBAR I

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-30-2013, 09:09 PM	#2 (permalink)
novicepilot Registered Users Thread Starter Join Date: Jan 2012	BTW i am running a Fullsize V-Bar

05-29-2013, 10:25 PM	#4 (permalink)
ChapaWolf Registered Users Join Date: Sep 2012	MA makes a front gyro mount for the Fury. I am using the CGY750. I moved the sensor up front and the controller to the rear gyro plate. As far as function I think it works better but also I don't have to remove my canopy to adjust the setting

Register Now

Log-in