need help picking which rx

[varacer]

Ok the radio is the 8fg heli is a 700n with vbar. Trying to figure out which rx to use with a gov which the gain has to be on ch7 or 8.

So does that mean the 3 ch sbus rx is out? If I get the 8ch sbus and use the sbus for the vbar can I use the open channels that are sent out over the sbus for something else?

[cbane]

I'm not familiar with Vbar, is it possible to customize the channel ordering (both the Futaba CGY-750 and the BeastX can do it)? If it's possible, you can move the governor output to channel 1-3, move whatever was already on that channel to the channel the governor was on, and then set up the Vbar to match.

Another option would be to use the built-in governor in the Vbar, if it works with nitro helis.

Either of these would let you use the R6203SB.

[dkpodder]

Originally Posted by cbane

I'm not familiar with Vbar, is it possible to customize the channel ordering (both the Futaba CGY-750 and the BeastX can do it)?

Yes, it is possible, no problem.

Originally Posted by cbane

Another option would be to use the built-in governor in the Vbar, if it works with nitro helis.

Yes it does, very well in fact.