Register Now

gixxum · 09-17-2009, 04:13 AM

Here is mine.

JR 8717 cyclic
Futaba 9256 tail
Youngblood ATG v3
Futaba GY520 gyro
610mm Rotor Tech blades
OS50 Hyper
Outrage pipe

Here is a short vid my buddy took..its pretty terrible, but better than nothin..

Schuster_Helis · 09-19-2009, 08:02 PM

I love this new Velocity. By Far the best 50 I have ever flown.

rc13ird · 09-20-2009, 01:54 PM

My Outrage Velocity

Spektrum Ar7100R - Outrage xprp 2s1p 3600mah
Align ds610 - Align ds620 - Align ds650 (Servos) - Align Gp750 Gyro
Perfect Regulator Remote Glow Switch
NovaRossi Rex57 Engine and Pipe
RotorTech 610 Main Rotor - KBDD paddles

watso · 09-29-2009, 08:36 PM

here is my new color after i scratched my other one due to loosing tail

wilywampa · 10-01-2009, 08:26 PM

This is my first nitro. I started up the engine today and it seems to run well. I'll fly it tomorrow.

kazager · 10-04-2009, 11:05 AM

beeflyer2 · 10-08-2009, 09:03 AM

OS 50 Hyper/Outrage pipe
Spektrum AR7100R
Hyperion LiFePO4 2100 6.6v
Align DS610 on cyclic and throttle
Spartan DS760/9256
Edge 603 mains/95 tails
Switchglo

badastinner · 10-10-2009, 10:23 AM

This is my buddies Velocity not mine...flies goood!

Oh yeah and I'm not flying it either.

kazager · 10-10-2009, 06:52 PM

sid-fmx · 10-11-2009, 02:29 AM

Nice! what dye did you use and how did you get the face on the frames orange too.

kazager · 10-14-2009, 04:34 AM

Rit dye for the gears. Orange decal on the tail case.

DominicD · 10-30-2009, 07:25 PM

My baby,

8717 Cyclic
8900G tail
Spartan gyro
Inolab throttle servo
MultiGov Pro with crank sensor
Switchglo
14ch Futaba FS Rx
Fromeco kiwi

Tradhunt · 10-30-2009, 07:54 PM

Looks great HFG. I like the way you did the YS pressure setup.

DominicD · 10-30-2009, 07:56 PM

Thanks.

CeeveeSiN · 11-02-2009, 11:28 AM

here's mine finally photogenic with one of its squadron mates.

dobje · 12-07-2009, 09:15 AM

Almost ready for it's maiden :

Looking for grommets to mount the canopy not supplied in the kit, and also not with the spare canopy

.

DominicD · 12-07-2009, 11:40 AM

Don't forget to secure those antennas dob, you dont want them flopping around.

dobje · 12-07-2009, 05:02 PM

Yes i do have to find something to secure / mount them , just finished securing the exhaust. Need some hole's to drill in the canopy and some other small thinks

DominicD · 12-07-2009, 05:05 PM

Remember only the tips of the lines are the actual antenna, the rest of it is just interconnect.

dobje · 12-07-2009, 05:10 PM

Yes, I think i am going to use some hot glue to glue a small tube 90 degree below the battery tray. I did a something similar on the G550.

09-17-2009, 04:13 AM	#41 (permalink)
gixxum Registered Users Join Date: Feb 2009	Here is mine. JR 8717 cyclic Futaba 9256 tail Youngblood ATG v3 Futaba GY520 gyro 610mm Rotor Tech blades OS50 Hyper Outrage pipe Here is a short vid my buddy took..its pretty terrible, but better than nothin.. Attached Thumbnails __________________ T-Rex 700 3G - T-Rex 600 LE .55H - T-Rex 600NSP Synergy N9 - Outrage Velocity T-Rex 450 Sport T-Rex 450 Pro

09-19-2009, 08:02 PM	#42 (permalink)
Schuster_Helis Registered Users My HF Map location Join Date: May 2006	Here I am... I love this new Velocity. By Far the best 50 I have ever flown. Attached Thumbnails __________________ Jim

09-20-2009, 01:54 PM	#43 (permalink)
rc13ird Registered Users Join Date: Jun 2008	My Outrage Velocity Spektrum Ar7100R - Outrage xprp 2s1p 3600mah Align ds610 - Align ds620 - Align ds650 (Servos) - Align Gp750 Gyro Perfect Regulator Remote Glow Switch NovaRossi Rex57 Engine and Pipe RotorTech 610 Main Rotor - KBDD paddles Attached Thumbnails Last edited by rc13ird; 11-16-2009 at 06:16 AM.. Reason: not complete

09-29-2009, 08:36 PM	#44 (permalink)
watso Registered Users Join Date: Feb 2007	canopy here is my new color after i scratched my other one due to loosing tail Attached Thumbnails

10-01-2009, 08:26 PM	#45 (permalink)
wilywampa Registered Users My HF Map location Join Date: Feb 2009	This is my first nitro. I started up the engine today and it seems to run well. I'll fly it tomorrow. __________________ MSHeli Protos Carbon FBL - Mini V-Bar, DS510/BLS251, Stock ESC/Motor Outrage Velocity 50 - V-Bar, YS56, DS610@8V/S9256, AR7100R, Edge 603mm Mikado Logo 500 SE - V-Bar, BLS451/BLS251, Jive 80+ HV, Scorpion 4025-630 on 10S, Edge FBL 603mm HeliTach - iPhone Tachometer

10-04-2009, 11:05 AM	#46 (permalink)
kazager Registered Users Join Date: Apr 2009

10-08-2009, 09:03 AM	#47 (permalink)
beeflyer2 Registered Users Join Date: May 2006 Location: Woodstock, GA	OS 50 Hyper/Outrage pipe Spektrum AR7100R Hyperion LiFePO4 2100 6.6v Align DS610 on cyclic and throttle Spartan DS760/9256 Edge 603 mains/95 tails Switchglo Attached Thumbnails

10-10-2009, 10:23 AM	#48 (permalink)
badastinner Registered Users My HF Map location Join Date: Jun 2006	Velocity Vid This is my buddies Velocity not mine...flies goood! Oh yeah and I'm not flying it either. __________________ No changes are permanent but...change is. Last edited by badastinner; 10-11-2009 at 05:21 PM..

10-10-2009, 06:52 PM	#49 (permalink)
kazager Registered Users Join Date: Apr 2009	Orange Gears Attached Thumbnails

10-11-2009, 02:29 AM	#50 (permalink)
sid-fmx Registered Users Join Date: Mar 2008	Nice! what dye did you use and how did you get the face on the frames orange too.

10-14-2009, 04:34 AM	#51 (permalink)
kazager Registered Users Join Date: Apr 2009	Rit dye for the gears. Orange decal on the tail case.

10-30-2009, 07:25 PM	#52 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	My baby, 8717 Cyclic 8900G tail Spartan gyro Inolab throttle servo MultiGov Pro with crank sensor Switchglo 14ch Futaba FS Rx Fromeco kiwi Attached Thumbnails __________________ Spreading capibara awareness since 2006

10-30-2009, 07:54 PM	#53 (permalink)
Tradhunt Registered Users My HF Map location Join Date: Nov 2006	Looks great HFG. I like the way you did the YS pressure setup. __________________ George I don't crash. I land with style. Bowtech and Hoyt

10-30-2009, 07:56 PM	#54 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Thanks. __________________ Spreading capibara awareness since 2006

11-02-2009, 11:28 AM	#55 (permalink)
CeeveeSiN Registered Users My HF Map location Join Date: Sep 2008	here's mine finally photogenic with one of its squadron mates. Attached Thumbnails __________________

12-07-2009, 09:15 AM	#56 (permalink)
dobje Registered Users Join Date: Oct 2006	Almost ready for it's maiden : Looking for grommets to mount the canopy not supplied in the kit, and also not with the spare canopy .

12-07-2009, 11:40 AM	#57 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Don't forget to secure those antennas dob, you dont want them flopping around. __________________ Spreading capibara awareness since 2006

12-07-2009, 05:02 PM	#58 (permalink)
dobje Registered Users Join Date: Oct 2006	Yes i do have to find something to secure / mount them , just finished securing the exhaust. Need some hole's to drill in the canopy and some other small thinks

12-07-2009, 05:05 PM	#59 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Remember only the tips of the lines are the actual antenna, the rest of it is just interconnect. __________________ Spreading capibara awareness since 2006

12-07-2009, 05:10 PM	#60 (permalink)
dobje Registered Users Join Date: Oct 2006	Yes, I think i am going to use some hot glue to glue a small tube 90 degree below the battery tray. I did a something similar on the G550.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in