FS Trex 250 and Extras. Need to Sell! BNF.

Xpcgamer · 08-17-2012, 10:53 AM

Well I just got this bird a little while ago. As soon as I got it I installed a new one way, new HS5065MG tail servo and installed my AR6100e RX. This bird is just too much for me.
Trex 250 (not a clone)
4 HS5065 MGs
Carbon tail servo rod
New one way.
Align Carbon blades.
Needs battery mount (I tried flying with a 1000mah battery and I guess it was too big and heavy for the mount)
2 batteries. 1 1000mah 20c and 1 850Mah 30c
Spare plastic Main blades.
Spare tail blades.
Extra tail boom and servo rod with guides.
Couple of extra Main shafts (the collar screw was stripped so just bought these to get the collar.
Bag of screws.
1 Align Canopy.
1 Align 1.3mm Hex driver
I am even including a BNIP MIP Thorpe .9mm driver. This was 13 bucks alone
The tail servo I bought was 40 bucks. I am sending you the HK servo that was on the tail. I can sell it for 200 shipped with the HK Tail servo instead of the 5065 if you prefer. The heli just needs the batteries to charge and a TX to fly. I will charge the batteries to "storage" voltage tonight. I am asking 240 shipped. I just purchased a 300x and I won't have room for the hell until I get rid of this one (not to mention I need to pay for it

).
Shipping to the lower 48. Paypal only. PM me for details.
And now for the pics!

Speedster00 · 08-17-2012, 11:35 AM

out of curiosity why dont you like it? You have a 450 and MCPX and this 250 falls right in the middle. Whats making you sell it?

Xpcgamer · 08-17-2012, 12:17 PM

I can't seem to dial this bird down. It feels like a mosquito on steroids. I am not at the point where I can take this heli and put it thru its paces. I also feel even a slight breeze pushes it around. I have the Head speed at a 100 but still. I have taken my MCPX out in 20 MPH winds before (of course I kept the nose into the wind the whole time) just to see how it would fly and it was actually fun. Maybe between the size and geometry of the cyclic servos is what makes this bird fly the way it does. Its just not for me. I would love to keep it and put it on a shelf but that would be doing this bird dirty. I needs to be flown and thrown around!

Xpcgamer · 08-17-2012, 07:16 PM

i Can sell it with the HK tail servo on it for 200 shipped. LMK If I get payment this weekend I can ship it out on Monday.

Xpcgamer · 08-17-2012, 09:11 PM

May trade this and my MCPX V2 for a 130x BNF.

Xpcgamer · 08-19-2012, 11:15 AM

Xpcgamer · 08-20-2012, 08:42 AM

Bumpo!

Xpcgamer · 08-21-2012, 05:40 AM

Traded. Please close thread.

08-17-2012, 10:53 AM	#1
Xpcgamer Registered Users Join Date: Apr 2012 Location: Pembroke Pines Fl	FS Trex 250 and Extras. Need to Sell! BNF. Well I just got this bird a little while ago. As soon as I got it I installed a new one way, new HS5065MG tail servo and installed my AR6100e RX. This bird is just too much for me. Trex 250 (not a clone) 4 HS5065 MGs Carbon tail servo rod New one way. Align Carbon blades. Needs battery mount (I tried flying with a 1000mah battery and I guess it was too big and heavy for the mount) 2 batteries. 1 1000mah 20c and 1 850Mah 30c Spare plastic Main blades. Spare tail blades. Extra tail boom and servo rod with guides. Couple of extra Main shafts (the collar screw was stripped so just bought these to get the collar. Bag of screws. 1 Align Canopy. 1 Align 1.3mm Hex driver I am even including a BNIP MIP Thorpe .9mm driver. This was 13 bucks alone The tail servo I bought was 40 bucks. I am sending you the HK servo that was on the tail. I can sell it for 200 shipped with the HK Tail servo instead of the 5065 if you prefer. The heli just needs the batteries to charge and a TX to fly. I will charge the batteries to "storage" voltage tonight. I am asking 240 shipped. I just purchased a 300x and I won't have room for the hell until I get rid of this one (not to mention I need to pay for it). Shipping to the lower 48. Paypal only. PM me for details. And now for the pics! __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all. Last edited by Xpcgamer; 08-17-2012 at 07:18 PM..

08-17-2012, 12:17 PM	#3
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	I can't seem to dial this bird down. It feels like a mosquito on steroids. I am not at the point where I can take this heli and put it thru its paces. I also feel even a slight breeze pushes it around. I have the Head speed at a 100 but still. I have taken my MCPX out in 20 MPH winds before (of course I kept the nose into the wind the whole time) just to see how it would fly and it was actually fun. Maybe between the size and geometry of the cyclic servos is what makes this bird fly the way it does. Its just not for me. I would love to keep it and put it on a shelf but that would be doing this bird dirty. I needs to be flown and thrown around! __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

08-17-2012, 07:16 PM	#4
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	i Can sell it with the HK tail servo on it for 200 shipped. LMK If I get payment this weekend I can ship it out on Monday. __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

08-17-2012, 09:11 PM	#5
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	May trade this and my MCPX V2 for a 130x BNF. __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

08-19-2012, 11:15 AM	#6
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	Up! __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

08-17-2012, 11:35 AM	#2
Speedster00 Registered Users My HF Map location Join Date: May 2012 Location: Spring, TX	out of curiosity why dont you like it? You have a 450 and MCPX and this 250 falls right in the middle. Whats making you sell it?

08-20-2012, 08:42 AM	#7
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	Bumpo! __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

08-21-2012, 05:40 AM	#8
Xpcgamer Registered Users Thread Starter Join Date: Apr 2012 Location: Pembroke Pines Fl	Traded. Please close thread. __________________ Trex 500 CF,Blade 450 3d, Blade 130x, Nano Cpx, Msrx-DX8 Running it all.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode