What RPM set for my Trex500 CF

tnitzani · 07-20-2012, 11:46 AM

Hi all,
I finaly got back my new ESC from CC, I have the ICE80 HV wich got back from its upgrading at CC, after using the stock Align ESC for 3 years.
What is the recommended RPM setup when using the stock Align motor 1600kv 6pole with a 12T pinion & 162T main gear, for:
Normal Mode:
Idle1:
Idle2:
Thank you in advance and a happy weekend to you all

DKS_ONE · 07-20-2012, 01:52 PM

If you were gonna run governor, the 12t pinion won't likely be enough. You could run a flat 100% throttle curve on your I/U modes and that should get you just over 2600 rpm which would be good. Say Normal 0,40,80,80,80 Idle1 85,85,85,85,85 and Idle2 100,100,100,100,100? That would work

07-20-2012, 11:46 AM	#1
tnitzani Registered Users Join Date: Nov 2009 Location: Haifa, ISRAEL	What RPM set for my Trex500 CF Hi all, I finaly got back my new ESC from CC, I have the ICE80 HV wich got back from its upgrading at CC, after using the stock Align ESC for 3 years. What is the recommended RPM setup when using the stock Align motor 1600kv 6pole with a 12T pinion & 162T main gear, for: Normal Mode: Idle1: Idle2: Thank you in advance and a happy weekend to you all

07-20-2012, 01:52 PM	#2
DKS_ONE Registered Users My HF Map location Join Date: Mar 2010 Location: Edmonton Alberta, Canada	If you were gonna run governor, the 12t pinion won't likely be enough. You could run a flat 100% throttle curve on your I/U modes and that should get you just over 2600 rpm which would be good. Say Normal 0,40,80,80,80 Idle1 85,85,85,85,85 and Idle2 100,100,100,100,100? That would work __________________ *Danno* Fusion 50, 600 conversion, 600mx motor, CC 80HV ESC with cap pack, Jolly Bee canopy UMX Carbon Cub SS DX8 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode