Register Now

nappyroots2182 · 01-07-2015, 07:45 PM

so ive never had issues at factory setting and just flew it. outrage 50 nitro. always great. but id like to play and see if i can make it better. how do i know when i have the head gain right and not too much?

quantummodz · 01-13-2015, 07:20 PM

To much will produce a wobble like your tail does not enough will not hold flight line try a fast fly by and see if it tracks and holds position pull up and see if it hold gain increases PID figures as you raise it

quantummodz · 01-13-2015, 07:26 PM

Pot one is cyclic again potc2 cyclic feel (crisper stops and tighter transitions
Pot 3 tail stops
Settings will depend on setup
Handy tip I've used for a long time now is twik precom on and expo added to tail rock solid tail

nappyroots2182 · 01-17-2015, 07:09 AM

ok. i have never had it feel like it needed adjusted. i just fly it. fast flybys were always solid. i just was thinking if i could turn it up to get even more of a locked feel. i wont be flying anytime soon due to the weather but will keep this in mind. i also have some new blades going on along with my new transmitter so ill be starting setup all over.

01-07-2015, 07:45 PM	#1 (permalink)
nappyroots2182 Registered Users Join Date: Sep 2007	head gains how much?? so ive never had issues at factory setting and just flew it. outrage 50 nitro. always great. but id like to play and see if i can make it better. how do i know when i have the head gain right and not too much?

01-13-2015, 07:20 PM	#2 (permalink)
quantummodz Registered Users Join Date: Mar 2011	To much will produce a wobble like your tail does not enough will not hold flight line try a fast fly by and see if it tracks and holds position pull up and see if it hold gain increases PID figures as you raise it __________________ "You can only achieve 95%. If you setup within the fixed physical or mathematical limits of your model."

01-13-2015, 07:26 PM	#3 (permalink)
quantummodz Registered Users Join Date: Mar 2011	Pot one is cyclic again potc2 cyclic feel (crisper stops and tighter transitions Pot 3 tail stops Settings will depend on setup Handy tip I've used for a long time now is twik precom on and expo added to tail rock solid tail __________________ "You can only achieve 95%. If you setup within the fixed physical or mathematical limits of your model."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2015, 07:09 AM	#4 (permalink)
nappyroots2182 Registered Users Thread Starter Join Date: Sep 2007	ok. i have never had it feel like it needed adjusted. i just fly it. fast flybys were always solid. i just was thinking if i could turn it up to get even more of a locked feel. i wont be flying anytime soon due to the weather but will keep this in mind. i also have some new blades going on along with my new transmitter so ill be starting setup all over.

Register Now

Log-in