Register Now

apper001 · 10-12-2016, 03:06 AM

Got meself a tuned 700MX and 600L Dominator kit, so time to strip the old bugger today and look what i found....

Gotta admit that we had a couple of rough flights lately

apper001 · 10-12-2016, 03:30 AM

Pinion looks pretty new, motor looks good but hear a bearing noise.

No idea what todo with the 600mx...

cobieg · 10-12-2016, 11:02 AM

is this from a crash?

apper001 · 10-12-2016, 03:33 PM

semi crash and wear&tear over 5 years of flying. semi crash came when packs died during flight and triggered an inverted "landing".

Heli.Maniac · 10-13-2016, 01:40 PM

I busted both frame sides in the same way after a crash. Turns out stiffening the frame to prevent servo flex does have its downsides. But that is nothing that some high strength epoxy can't fix.

apper001 · 10-13-2016, 03:40 PM

Got the new 600l kit today, looks nice and spanky! And now got a whole bunch of spares, will take a couple of days to assemble and then see what goes with my tuned 1.5mm 510KV 700MX. Like the new blue/red/white canopy, althought could be a bit thicker and stiffer.

setup:
tuned 700MX
pinion 14?
80CC or 120HV
3SX
1x/2x 1700 mah lifepo4 Rx pack
Align 600/95mm to start, maybe chop some 105mm to 100mm, and might upgrade to VTX

10-12-2016, 03:06 AM	#1 (permalink)
apper001 Registered Users Join Date: Mar 2011	Lucky Bastard... Got meself a tuned 700MX and 600L Dominator kit, so time to strip the old bugger today and look what i found.... Gotta admit that we had a couple of rough flights lately Attached Thumbnails Last edited by apper001; 10-12-2016 at 08:13 AM..

10-12-2016, 03:30 AM	#2 (permalink)
apper001 Registered Users Thread Starter Join Date: Mar 2011	motor pinion Pinion looks pretty new, motor looks good but hear a bearing noise. No idea what todo with the 600mx... Attached Thumbnails

10-12-2016, 11:02 AM	#3 (permalink)
cobieg Registered Users Join Date: Aug 2012	is this from a crash? __________________ I didn't crash. I just ran out of airspeed, altitude, and idea's all at the same time.

10-13-2016, 01:40 PM	#5 (permalink)
Heli.Maniac Registered Users My HF Map location Join Date: Mar 2011	I busted both frame sides in the same way after a crash. Turns out stiffening the frame to prevent servo flex does have its downsides. But that is nothing that some high strength epoxy can't fix. __________________ Andreas M. Compass 7HVU Logo 600SX V2 Blade 450X

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-12-2016, 03:33 PM	#4 (permalink)
apper001 Registered Users Thread Starter Join Date: Mar 2011	semi crash and wear&tear over 5 years of flying. semi crash came when packs died during flight and triggered an inverted "landing".

10-13-2016, 03:40 PM	#6 (permalink)
apper001 Registered Users Thread Starter Join Date: Mar 2011	Got the new 600l kit today, looks nice and spanky! And now got a whole bunch of spares, will take a couple of days to assemble and then see what goes with my tuned 1.5mm 510KV 700MX. Like the new blue/red/white canopy, althought could be a bit thicker and stiffer. setup: tuned 700MX pinion 14? 80CC or 120HV 3SX 1x/2x 1700 mah lifepo4 Rx pack Align 600/95mm to start, maybe chop some 105mm to 100mm, and might upgrade to VTX

Register Now

Log-in