Register Now

ah_liang · 10-05-2012, 08:15 PM

For some reason, I like the frame but the canopy put me off.

Did anyone tried canopies from other heli brand and see if they fit exactly or at most to cut some new holes for the grommet?

Beside the T600 I have now the 7HV but obviously it is too big.

satgod · 10-05-2012, 09:07 PM

I buy these 4 at a time and then paint them as I please

they have a flat rate 20.00 shipping fee to the U.S.
4 canopies run almost 100.00
order a few 450pro parts while your there to make it a better deal

NOTE: their one way bearings are good for about 10 flights but the hubs are fine if you want to put another brand bearing in them

rc-bender · 10-12-2012, 09:22 PM

I have the Fusuno canopy made for this heli. Love the look, color, finish and fit. No drilling etc. It's ready to go, and less money than the sotck one.

ah_liang · 10-15-2012, 08:47 PM

I have a fusuno one too but just wondered if other heli canopies fits. For example can a logo 600 be fitted to the trex frame.

d.porte · 10-19-2012, 03:01 PM

Here is mine and i love it

stew70 · 10-20-2012, 03:23 AM

i had a spare logo 600 canopy lying around that i tried,and it fits perfect,the only reason i dont use it is it says logo 600 on the side of it.
other than that i think it looks great.

Praztek · 10-20-2012, 08:50 AM

Some of these look like a nice alternative.

http://canomod.com/shopping/index.ph...8a19f852a05224

bavci_0655 · 10-20-2012, 02:49 PM

Quote:

Originally Posted by stew70

i had a spare logo 600 canopy lying around that i tried,and it fits perfect,the only reason i dont use it is it says logo 600 on the side of it.
other than that i think it looks great.

Can you show us photos from behind? I don't think it will align properly.

ah_liang · 10-24-2012, 03:37 AM

Quote:

Originally Posted by stew70

i had a spare logo 600 canopy lying around that i tried,and it fits perfect,the only reason i dont use it is it says logo 600 on the side of it.
other than that i think it looks great.

Hi there, that was exactly what I was after. Think the logo 600 canopy will be one of my consideration.

HFMan · 10-24-2012, 11:29 PM

Here's my latest Canomod- fit and finish are excellent. Using Quick UK Magnetic mounts.

Praztek · 10-25-2012, 06:59 AM

Pretty nice canomod canopy !

davehour · 10-26-2012, 05:52 AM

Wao, that canopy looks gorgeous!

ah_liang · 11-11-2012, 03:34 AM

Thanks to fellow helifreakers, here is it ......

More cooling space!!!

Will finish the project by doing a clip to join the the split up.

aisella · 04-11-2013, 10:10 AM

I want to use the logo 600 canopy but I have a doubt:
is it necessary to drill the canopy or I can use as is....with logo mounting holes??

thanks.

10-05-2012, 08:15 PM	#1 (permalink)
ah_liang Registered Users Join Date: Sep 2011	Alternative Canopy For some reason, I like the frame but the canopy put me off. Did anyone tried canopies from other heli brand and see if they fit exactly or at most to cut some new holes for the grommet? Beside the T600 I have now the 7HV but obviously it is too big.

10-05-2012, 09:07 PM	#2 (permalink)
satgod Registered Users My HF Map location Join Date: Apr 2011	I buy these 4 at a time and then paint them as I please they have a flat rate 20.00 shipping fee to the U.S. 4 canopies run almost 100.00 order a few 450pro parts while your there to make it a better deal NOTE: their one way bearings are good for about 10 flights but the hubs are fine if you want to put another brand bearing in them __________________ 4 x Rush 750/stretched V-bar KDE 700XF-495 HV servos Greys reactor CC 160-HV Trex 600EFL V2 V-Bar ds610 ds650 CC bec/pro Scorpion 130a HV KDE 600XF-530 450L KDE 1750 cc50 4xDS215MG k-bar X-8 FPV Wing, TBS Discovery FPV, TBS Caipirinha FPV

10-12-2012, 09:22 PM	#3 (permalink)
rc-bender Registered Users Join Date: Mar 2011	I have the Fusuno canopy made for this heli. Love the look, color, finish and fit. No drilling etc. It's ready to go, and less money than the sotck one. __________________ T-Rex 600e, Atom 500, Blade 450X, Nano CP X

10-19-2012, 03:01 PM	#5 (permalink)
d.porte Registered Users Join Date: Sep 2010	Here is mine and i love it __________________ GOBLIN 700 competition / CC 160HV / KDE 700XF 495 / MSH Brain/IKON (ordered) ALIGN T-REX600EFL Pro / CC 80HV+ / KDE 600XF-530 / MSH Brain/IKON

10-20-2012, 03:23 AM	#6 (permalink)
stew70 Registered Users Join Date: Jul 2010	i had a spare logo 600 canopy lying around that i tried,and it fits perfect,the only reason i dont use it is it says logo 600 on the side of it. other than that i think it looks great. Attached Thumbnails __________________ 450 pro v2 mini v bar / 500 pro dfc mini v bar

10-15-2012, 08:47 PM	#4 (permalink)
ah_liang Registered Users Thread Starter Join Date: Sep 2011	I have a fusuno one too but just wondered if other heli canopies fits. For example can a logo 600 be fitted to the trex frame.

10-20-2012, 08:50 AM	#7 (permalink)
Praztek Registered Users Join Date: Oct 2007	Some of these look like a nice alternative. http://canomod.com/shopping/index.ph...8a19f852a05224

10-24-2012, 11:29 PM	#10 (permalink)
HFMan Registered Users Join Date: Apr 2012	Here's my latest Canomod- fit and finish are excellent. Using Quick UK Magnetic mounts. __________________ Blade 130X- My cul-del-sac flyer. Blade 450X w/MSH Brain - My Ferrari T-Rex 600 EFL Pro w/SK-720 BE, KDE600XF & SK-GPS - My BMW T-Rex 700 HV DFC w/VBar, Kosmik 200 & KDE700XF - My muscle heli

10-25-2012, 06:59 AM	#11 (permalink)
Praztek Registered Users Join Date: Oct 2007	Pretty nice canomod canopy !

10-26-2012, 05:52 AM	#12 (permalink)
davehour Registered Users Join Date: Dec 2004	Wao, that canopy looks gorgeous! __________________ T-Rex 700E Pro DFC, Spirit FBL Unit, Futaba R6303SB/8FGHS Blade mCPx 140mm boom, DX7 RealFlight 7

11-11-2012, 03:34 AM	#13 (permalink)
ah_liang Registered Users Thread Starter Join Date: Sep 2011	Thanks to fellow helifreakers, here is it ...... More cooling space!!! Will finish the project by doing a clip to join the the split up.

04-11-2013, 10:10 AM	#14 (permalink)
aisella Registered Users Join Date: Mar 2009	I want to use the logo 600 canopy but I have a doubt: is it necessary to drill the canopy or I can use as is....with logo mounting holes?? thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in