START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
150 Class Electric Helicopters 150 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
01-19-2017, 11:08 AM | #1 (permalink) |
Registered Users
Join Date: Mar 2016
|
150x Feels Mushy in 3D Mode
It fly's around fine in Attitude mode quick response on inputs. When I switch to 3d mode it is very mushy and slow response I tried beginner mode and experienced mode with the same result via the app.It is actually hard to control it is so slow nothing like my other heli's. I just fly around no 3d yet. What settings should I try to tweak first in the app? I only set pitch and throttle curves for idle up's on my transmitter and dual rates. The app is used for everything else correct?
Thanks in advance |
Sponsored Links | |||
Advertisement |
|
01-19-2017, 08:28 PM | #2 (permalink) |
Registered Users
Join Date: Jan 2015
|
I have the same problem.... looking forward to an answer!
__________________
Synergy 766 -- Align 500L -- Blade 180CFX -- Align 150X |
01-19-2017, 08:29 PM | #3 (permalink) |
Registered Users
Join Date: Nov 2012
|
Please just try the expert setting in cyclic and use some expo on your TX. I'm not so good at 3D I can just fly around inverted but I also found "experienced" and "beginner" setting are way too slow.
|
01-20-2017, 12:05 PM | #4 (permalink) |
Registered Users
Join Date: Oct 2011
|
you have you atitude switch backwards man. your trying to fly in atitude mode and you think your in 3d mode. your backwards. how is that not obvious to you?
__________________
UH-60 EXI 500 DFC/3GX v5.0 ICE 75 Bec Pro w/4 blade main & tail rotors Align trex 500DFC Pro w/AR7210bx Oxy 2 FE micro Ikon2 Talon 25 BA 8-1 servos Oxy 3 Tareq Edition AR7210bx Edge lite 50 Kst 215's PL6 w/Bump Controller-24v PS DX8 gen2 |
01-20-2017, 07:57 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Mar 2016
|
Got it a little better. Raised gain slightly and raised cyclic accuracy to 60. It seems to have a little more snap to cyclic stop. Also raised cyclic response to 55. Will tinker a bit more when charged.
Other issue is getting used to this tiny thing. Big difference from a 450L and nitros. Thanks again |
02-02-2017, 12:42 PM | #7 (permalink) |
Registered Users
Join Date: Dec 2016
|
Just another thing to check.
I actually found with mine the reporting back of the switching action for the modes being shown in the app was not actually switching the mode on the helo. Basically I thought I was in 3D because the app via its info said I had the gain adjusted right with the switching, but I actually wasn't To be sure you really need to look at the lights on the board and about 3/4 into the manual there is a chart of what lights mean what. |
Thread Tools | |
Display Modes | |
|
|