Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > 550 Class Electric Helicopters


550 Class Electric Helicopters 550 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar.


Reply
 
LinkBack Thread Tools Display Modes
Old 11-04-2010, 10:13 AM   #1 (permalink)
Registered Users
 

Join Date: May 2010
Default can i use the 17 tooth pinion with the stock setup

my kit has both 16 and 17 tooth pinions, i am running the 16 but was wondering if the 17 will work better with the stock set up.

stock servos
stock motor
stock esc
spartain quark gyro
stock blades
hyperion 5000mAh 35c 6s pack
spectrum ar60000 reciver

opinions please
mickshalldale@yahoo.com is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-04-2010, 10:21 AM   #2 (permalink)
Fear the Spork!!
 

Join Date: Mar 2008
Default

Running the 17t will give you a higher headspeed but at the cost of flight time.

Unless you're a stick banger stick with the 16t.
__________________
Trex 450L, OMP M2, Futaba 14SG
Spork01 is offline        Reply With Quote Quick reply to this message
Old 11-04-2010, 10:48 AM   #3 (permalink)
HF Support
 
Posts: 11,599
 
My HF Map location
Join Date: Nov 2007
Default

Quote:
Unless you're a stick banger stick with the 16t.
+1

Quote:
spectrum ar60000 reciver
Typo...but if you're using AR6000/6100/6110 you should reconsider that decision.
__________________
Jonathan Livingston Helicopter
Blade 400: E-flite 420H/35X ESC, AR6100e, HS65HB x 3, G401B/DS290G. (Ret.)
CopterX 450AE V2: 430XL/35X ESC, AR6100, HS65HB x 3, LTG2100T/HSG-5084MG.
T-Rex 550E V1 Classic Flybar: 600MX/BL70G, AR6200, DS610 x 3, Quark/DS650, 16t/520mm blades.
Wolfpackin is offline        Reply With Quote Quick reply to this message
Old 11-04-2010, 10:48 AM   #4 (permalink)
Registered Users
 

Join Date: Sep 2010
Location: Central Illinois, USA
Default

17t is ok with the stock blades but will cut the flight time a little. Don’t use 17t if you go to longer blades or you may blow the ESC but it’s ok with the stock 520mm blades.
 
RC Mike is offline        Reply With Quote Quick reply to this message
Old 11-04-2010, 01:10 PM   #5 (permalink)
Registered Users
 
Posts: 19,224
 

Join Date: Jan 2009
Location: NorCal
Default

Yikes. Please do not use a parkflyer receiver for your 550!
OnTheSnap is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1