Register Now

WillJames · 08-16-2004, 07:25 PM

John's MA Spectra G 3D Gas - IRCHA DEMO - Flying by H to the C (14.7M)

John's MA Spectra G 3D Gas - HeliFreak Invasion DEMO - Flying by H to the C (15.7M)

Check this out everybody!!!

HeliPimp · 08-17-2004, 05:26 AM

Machine looks good but a damn pocket raper if I say so. HC makes it look easy doesn't he! This cat named Kenny T will be selling a Tempest in lue of this new machine, thanks to HC. Biatch.....Jesse

Galifrey · 08-17-2004, 09:00 AM

WOW

Impressive stuff

RotorX · 08-18-2004, 05:01 AM

Great vid - model sounded awesome, what headspeed what he using?

bigrcr · 08-18-2004, 05:02 AM

Head speed was 1820 RPM.

:wink:

Brett Horton · 08-19-2004, 06:45 PM

Hey John Awesome Heli!!
You been doing good?
My X-cell Gasser is still hauling away several times a week
Time to come up your way and fly.
See ya
Brett Horton

bigrcr · 08-20-2004, 11:47 AM

Brett! Long time no see, my friend. Yes, we need to get together and mix up some air!

Later,

CARLOS LUIS · 08-20-2004, 09:01 PM

What engine do it has in this flight, G231 or G26? Maybe a Hanson Modified???

Looks terrific!!!!! :glasses2:

bigrcr · 08-20-2004, 09:14 PM

Zenoah G-231
Later,

Galifrey · 08-22-2004, 05:10 AM

Thats the first MA heli thats got me moist since the Pro2k

bigrcr · 08-22-2004, 07:28 AM

Galifrey · 08-23-2004, 03:57 AM

Tis true, and I had a Pro2k.. looks like I gotta save up for a Spectra-G now

WillJames · 08-23-2004, 06:02 AM

The Spectra G is the daddeh!!

John Garst ROCKS!!!! Great work John!!

big dee · 08-27-2004, 08:41 AM

iv cannt wait Boys

dperry · 12-08-2004, 09:14 PM

[quote="bigrcr"]Head speed was 1820 RPM.

What blades is he using?

And do most people use a gov?

Thanks,

Don

bigrcr · 12-08-2004, 09:26 PM

For that flight the machine was using SAB 710's at 184 grams and MAH 110 tail blades. The machine now flies with MAH 710 double taper blades.

I use a governor on this machine, it helps keep the RPM in check when coming through center stick or in rapid descents. This motor likes to rev and is turning in the low to mid 13,000's. There is a lot of rotational mass in the motor and when coming out of pitch even a governor cannot handle all of it so there can be moments of a little over-speed. This will not harm the motor as it can see much higher RPM than that. A little addition of pitch or load will quickly remedy this.

Later,

08-16-2004, 07:25 PM	#1 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	Spectra G 3D Gas IRCHA Demo and flying John's MA Spectra G 3D Gas - IRCHA DEMO - Flying by H to the C (14.7M) John's MA Spectra G 3D Gas - HeliFreak Invasion DEMO - Flying by H to the C (15.7M) Check this out everybody!!! __________________ William James Crazy wife still trying to kill me. Last edited by WillJames; 01-21-2010 at 06:06 AM..

08-17-2004, 05:26 AM	#2 (permalink)
HeliPimp Registered Users Join Date: May 2004 Location: Round Rock Texas	HC is a biatch!!! Machine looks good but a damn pocket raper if I say so. HC makes it look easy doesn't he! This cat named Kenny T will be selling a Tempest in lue of this new machine, thanks to HC. Biatch.....Jesse

08-18-2004, 05:02 AM	#5 (permalink)
bigrcr Registered Users Join Date: Apr 2004	Head speed was 1820 RPM. :wink: __________________ BIGRCR- John Garst Toxic Racing Motors IRCHA #1716

08-19-2004, 06:45 PM	#6 (permalink)
Brett Horton Registered Users My HF Map location Join Date: Apr 2004	Hey John Awesome Heli!! You been doing good? My X-cell Gasser is still hauling away several times a week Time to come up your way and fly. See ya Brett Horton __________________ Thanks, Brett Horton www.copterviews.com

08-20-2004, 11:47 AM	#7 (permalink)
bigrcr Registered Users Join Date: Apr 2004	Brett! Long time no see, my friend. Yes, we need to get together and mix up some air! Later, __________________ BIGRCR- John Garst Toxic Racing Motors IRCHA #1716

08-17-2004, 09:00 AM	#3 (permalink)
Galifrey Join Date: Apr 2004	WOW Impressive stuff

08-18-2004, 05:01 AM	#4 (permalink)
RotorX Join Date: Jun 2004	Great vid - model sounded awesome, what headspeed what he using?

08-20-2004, 09:01 PM	#8 (permalink)
CARLOS LUIS Registered Users Join Date: Jul 2004	too Cool What engine do it has in this flight, G231 or G26? Maybe a Hanson Modified??? Looks terrific!!!!! :glasses2: __________________ Thanks a lot, Carlos L Arrieta Just want to fly Helicopters...........

08-20-2004, 09:14 PM	#9 (permalink)
bigrcr Registered Users Join Date: Apr 2004	Zenoah G-231 Later, __________________ BIGRCR- John Garst Toxic Racing Motors IRCHA #1716

08-22-2004, 05:10 AM	#10 (permalink)
Galifrey Join Date: Apr 2004	Thats the first MA heli thats got me moist since the Pro2k

08-22-2004, 07:28 AM	#11 (permalink)
bigrcr Registered Users Join Date: Apr 2004	__________________ BIGRCR- John Garst Toxic Racing Motors IRCHA #1716

08-23-2004, 03:57 AM	#12 (permalink)
Galifrey Join Date: Apr 2004	Tis true, and I had a Pro2k.. looks like I gotta save up for a Spectra-G now

08-23-2004, 06:02 AM	#13 (permalink)
WillJames Registered User Thread Starter My HF Map location Join Date: Mar 2004	The Spectra G is the daddeh!! John Garst ROCKS!!!! Great work John!! __________________ William James Crazy wife still trying to kill me.

08-27-2004, 08:41 AM	#14 (permalink)
big dee Join Date: May 2004	iv cannt wait Boys

12-08-2004, 09:14 PM	#15 (permalink)
dperry Registered Users Join Date: Dec 2004 Location: Oklahoma City, OK	[quote="bigrcr"]Head speed was 1820 RPM. What blades is he using? And do most people use a gov? Thanks, Don

12-08-2004, 09:26 PM	#16 (permalink)
bigrcr Registered Users Join Date: Apr 2004	For that flight the machine was using SAB 710's at 184 grams and MAH 110 tail blades. The machine now flies with MAH 710 double taper blades. I use a governor on this machine, it helps keep the RPM in check when coming through center stick or in rapid descents. This motor likes to rev and is turning in the low to mid 13,000's. There is a lot of rotational mass in the motor and when coming out of pitch even a governor cannot handle all of it so there can be moments of a little over-speed. This will not harm the motor as it can see much higher RPM than that. A little addition of pitch or load will quickly remedy this. Later, __________________ BIGRCR- John Garst Toxic Racing Motors IRCHA #1716

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in