Register Now

Mightythor · 02-21-2015, 03:02 PM

Is there anywhere to purchase main shafts and OWB hub from?
Having a hard time finding either.
Thanks

pctomlin · 02-21-2015, 09:06 PM

Found this place, seems to be legit but in a high risk country. They have the parts you need.

http://e-hely.com/index.php?route=pr...ath=291_35_335

Part of an article out of RC Heli Resource dot com

http://www.rcheliresource.com/tag/e-hely/

The 2011 3D RC Helicopter Competition Indonesia (Fly With Tareq) was 2 weeks ago. I must say that the event was a well organized machine and brought in pilots from all over Asia. Agus Lie, owner of E-Hely in Indonesia was the mastermind of the event and I must admit that he has raised the bar on locations for fun fly events. No cost was spared and the experience was amazing. Too bad this competition only comes every three (3) years.

Mightythor · 02-22-2015, 07:17 AM

Thank you I will check the out.
If I can stock a few of these parts I'll be good to go for awhile.

lotus7 · 02-23-2015, 11:06 AM

I've got a box full of spares - as well as a complete FBL 550 that is /will probably never be flown anymore .
Will be really cheap if anyone is prepared to pay shipping
PM me if anyone wants to see photos

freewheel510 · 03-31-2015, 02:46 PM

Hi All (?)
I stopped flying a couple years ago, and still have a number of spares for the O550. I have some tail rotor shafts, and some frame bases, and a lot of other bits.

Anybody out there who wants O550 pieces still?
Chris

beltfedbrowning · 04-01-2015, 08:04 AM

Interested. What you got and what are you asking for the lot?

lotus7 · 04-19-2015, 09:13 AM

Guys
I have posted my job lot of lots of mostly new spares , plus heli , in the For Sale columns , should anyone be interested

byHISgrace · 01-10-2016, 08:52 PM

I'm looking for a part. R550350-ss. Specifically the tail bell crank support that bolts to the tail case. Anybody got one?

pctomlin · 01-10-2016, 09:49 PM

I believe I can part with one of mine. How much of the tail bell crank do you need, everything in the part# picture?

byHISgrace · 01-11-2016, 08:19 PM

Awesome! I only need the base that bolts to the tail case bearing holder. Matt

wolfdown · 02-24-2016, 08:22 PM

I need some 550 parts! Anyone have the following parts? If you have other additional items let me know.

R50N575-3 OUTRAGE FBL Washout Base
R50N575-4 OUTRAGE FBL Lower Mixing Arms
R50N575-7 OUTRAGE FBL Blade Grip Arm Set
R50N575-8 OUTRAGE FBL Spindle Shaft
R50N575-9 OUTRAGE FBL Linkage Rod Set

R550200-2 OUTRAGE 550 Main Gear
R550342-SS OUTRAGE Canopy Pin Set

02-21-2015, 03:02 PM	#1 (permalink)
Mightythor Registered Users Join Date: Dec 2009 Location: Orting, WA	550 Parts Is there anywhere to purchase main shafts and OWB hub from? Having a hard time finding either. Thanks

02-21-2015, 09:06 PM	#2 (permalink)
pctomlin Registered Users Join Date: Nov 2008	Found this place, seems to be legit but in a high risk country. They have the parts you need. http://e-hely.com/index.php?route=pr...ath=291_35_335 Part of an article out of RC Heli Resource dot com http://www.rcheliresource.com/tag/e-hely/ The 2011 3D RC Helicopter Competition Indonesia (Fly With Tareq) was 2 weeks ago. I must say that the event was a well organized machine and brought in pilots from all over Asia. Agus Lie, owner of E-Hely in Indonesia was the mastermind of the event and I must admit that he has raised the bar on locations for fun fly events. No cost was spared and the experience was amazing. Too bad this competition only comes every three (3) years. __________________ Paul Agile 5.5 - Q 4125-1100, YEP 120, Brain2 HD FBL / Outrage 550 - HK4020-1390, Edge 120, Brain2 HD Rave Ballistic FSO - Q 4530-500, Edge 160HV, Brain2 HD / Protos Max V2 - MSH 4530-500, Edge 160HV, Brain2 HD

02-22-2015, 07:17 AM	#3 (permalink)
Mightythor Registered Users Thread Starter Join Date: Dec 2009 Location: Orting, WA	Parts Thank you I will check the out. If I can stock a few of these parts I'll be good to go for awhile.

02-23-2015, 11:06 AM	#4 (permalink)
lotus7 Registered Users My HF Map location Join Date: Aug 2007	I've got a box full of spares - as well as a complete FBL 550 that is /will probably never be flown anymore . Will be really cheap if anyone is prepared to pay shipping PM me if anyone wants to see photos __________________ *Lotus7*

03-31-2015, 02:46 PM	#5 (permalink)
freewheel510 Registered Users Join Date: Jan 2010	parts available Hi All (?) I stopped flying a couple years ago, and still have a number of spares for the O550. I have some tail rotor shafts, and some frame bases, and a lot of other bits. Anybody out there who wants O550 pieces still? Chris

04-01-2015, 08:04 AM	#6 (permalink)
beltfedbrowning Registered Users My HF Map location Join Date: Aug 2008 Location: KC mo	Interested. What you got and what are you asking for the lot?

04-19-2015, 09:13 AM	#7 (permalink)
lotus7 Registered Users My HF Map location Join Date: Aug 2007	Guys I have posted my job lot of lots of mostly new spares , plus heli , in the For Sale columns , should anyone be interested __________________ *Lotus7*

01-10-2016, 08:52 PM	#8 (permalink)
byHISgrace Registered Users My HF Map location Join Date: Mar 2005	I'm looking for a part. R550350-ss. Specifically the tail bell crank support that bolts to the tail case. Anybody got one?

01-10-2016, 09:49 PM	#9 (permalink)
pctomlin Registered Users Join Date: Nov 2008	I believe I can part with one of mine. How much of the tail bell crank do you need, everything in the part# picture? __________________ Paul Agile 5.5 - Q 4125-1100, YEP 120, Brain2 HD FBL / Outrage 550 - HK4020-1390, Edge 120, Brain2 HD Rave Ballistic FSO - Q 4530-500, Edge 160HV, Brain2 HD / Protos Max V2 - MSH 4530-500, Edge 160HV, Brain2 HD

01-11-2016, 08:19 PM	#10 (permalink)
byHISgrace Registered Users My HF Map location Join Date: Mar 2005	Awesome! I only need the base that bolts to the tail case bearing holder. Matt

02-24-2016, 08:22 PM	#11 (permalink)
wolfdown Registered Users Join Date: Oct 2009	I need some 550 parts! Anyone have the following parts? If you have other additional items let me know. R50N575-3 OUTRAGE FBL Washout Base R50N575-4 OUTRAGE FBL Lower Mixing Arms R50N575-7 OUTRAGE FBL Blade Grip Arm Set R50N575-8 OUTRAGE FBL Spindle Shaft R50N575-9 OUTRAGE FBL Linkage Rod Set R550200-2 OUTRAGE 550 Main Gear R550342-SS OUTRAGE Canopy Pin Set __________________ Rush 750 w/ Xera 4530-500 (12T), YGE160HV, WR S.BEC, Torq 9180/9188, AR7200BX Outrage 550 w/ Scorp 4020-1390 (13T), YGE120, CC BEC Pro, Quark, MKS BLS980, Futaba BLS451

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in