START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
700 Class Electric Helicopters 700 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
05-05-2012, 09:46 PM | #1 (permalink) |
Registered Users
Join Date: Jun 2010
|
720 guys,need help!
i have a 720 laying around,i want to yank the 3G out and put teh 720 in my 700.
i know i have to run the power bus,if you run the powerbus do you still need to run an extrenal BEC if you have to hook a lipo to the powerbus? im runing the ds610 and 650 on the 700,do you have to bridge the PB if not using HV servos? where did you guys mount your 720? can you guys post pics of your set u please? thanks
__________________
Trex 700E DFC V-Bar , Trex 600N , Logo 600 SE FBL V-bar, Logo 600/550 FBL V-bar,Logo 400 FBL V-Bar ,Goblin 500 V-Bar, Blade 130X , Blade MCPx , Blade 500X |
Sponsored Links | |||
Advertisement |
|
05-05-2012, 10:11 PM | #2 (permalink) |
Registered Users
Join Date: Jun 2008
|
How about you go to the link below....tons of info.
https://www.helifreak.com/forumdisplay.php?f=118 |
05-05-2012, 11:12 PM | #3 (permalink) |
Registered Users
Join Date: Aug 2009
|
I jumper the HV and LV sides and run 6V to the whole thing with the Jive's BEC on one heli and a WR BEC on another heli. I don't use the external power leads. In fact, I cut them off.
I mounted my SK at the back behind the main shaft (had to drill some holes, used a spare motor mount). I did this because my 700MX had a terrible motor vibe. |
05-05-2012, 11:16 PM | #4 (permalink) | |
Registered Users
Thread Starter
Join Date: Jun 2010
|
Quote:
hey man you have any pics of that set up with the WB BEC and what servos are you running? also is the 6v going into the PB is from the WR BEC?
__________________
Trex 700E DFC V-Bar , Trex 600N , Logo 600 SE FBL V-bar, Logo 600/550 FBL V-bar,Logo 400 FBL V-Bar ,Goblin 500 V-Bar, Blade 130X , Blade MCPx , Blade 500X |
|
05-05-2012, 11:29 PM | #5 (permalink) |
Registered Users
Join Date: Aug 2009
|
Align DS610 cyclics, MKS DS760 tail. WR BEC outputs plug into two open slots in the PB.
Don't think I have any pics. You can probably mount the SK up front if your motor is properly balanced. |
05-05-2012, 11:31 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2010
|
is it possible to snap a few shots please?
__________________
Trex 700E DFC V-Bar , Trex 600N , Logo 600 SE FBL V-bar, Logo 600/550 FBL V-bar,Logo 400 FBL V-Bar ,Goblin 500 V-Bar, Blade 130X , Blade MCPx , Blade 500X |
Thread Tools | |
Display Modes | |
|
|