Register Now

rdlohr · 10-26-2009, 06:49 PM

RDLohr’s Clearly Superior Products
TREX 500 VBAR Mount
This mount provides an additional rigid mounting surface for your VBAR, gyro, receiver, or both. (Inspired by Steven Bales)
Length 3 ¼”

Be very careful that all is secure. A safety strap of some kind is recommended for added security. Losing a component mid flight will make for a very challenging landing and could be dangerous!

Note: Peel protective paper off all Lexan before use (if there is any)
Note: Edges can be sanded with 220 grit sand paper if the fit is too tight or if there are rough edges or burrs.
Note: Clean any machine oil off the screws before installation
Note: For additional security, add a touch of CA when installing the screws (Optional)
Note: Reverse the “Dir” switch on your gyro if inverting it or spinning will occur.

Good Luck and thanks,

Rick

rlohr@berkshire.rr.com
http://www.rdlohr.com/

LITHIUMSTATIC · 10-26-2009, 07:02 PM

rdlohr · 10-26-2009, 07:56 PM

Quote:

Originally Posted by LITHIUMSTATIC

Thanks Jeremy. It was a customers idea.

Rick

acidla · 10-27-2009, 09:09 AM

When this mount will be available at readyheli?
I would like to order it along with the mini vbar.

Cheers

rdlohr · 10-27-2009, 09:37 AM

I only turn products over to Ready when they hit a certain volume of sales. In the mean time, you can order from me direct.

rlohr@nycap.rr.com

Just specify TREX 500 VBAR Mount.

Rick

acidla · 10-27-2009, 11:00 AM

Email sent!

rdlohr · 11-15-2009, 07:01 PM

I posted a better picture that more accurately shows the length.
Rick

soarman · 12-17-2009, 08:00 PM

Thanks Rick!
Sorry took so long to reply, fit's great and fly's Great, nice and neat
setup.

Thanks
Steve

rdlohr · 12-17-2009, 09:39 PM

Quote:

Originally Posted by soarman

Thanks Rick!
Sorry took so long to reply, fit's great and fly's Great, nice and neat
setup.

Thanks
Steve

Sweet. So your receiver is behind the gyro. That works out nicely!
Rick

soarman · 12-17-2009, 11:16 PM

Comes out as one unit, very clean.

Steve

rdlohr · 12-18-2009, 05:11 AM

Cool. Next time you have it out, snap a photo of it if you think about it. Very nice!
Rick

10-26-2009, 06:49 PM	#1 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	RDLohr's TREX 500 VBAR Mount RDLohr’s Clearly Superior Products TREX 500 VBAR Mount This mount provides an additional rigid mounting surface for your VBAR, gyro, receiver, or both. (Inspired by Steven Bales) Length 3 ¼” Be very careful that all is secure. A safety strap of some kind is recommended for added security. Losing a component mid flight will make for a very challenging landing and could be dangerous! Note: Peel protective paper off all Lexan before use (if there is any) Note: Edges can be sanded with 220 grit sand paper if the fit is too tight or if there are rough edges or burrs. Note: Clean any machine oil off the screws before installation Note: For additional security, add a touch of CA when installing the screws (Optional) *Note: Reverse the “Dir” switch on your gyro if inverting it or spinning will occur.* Good Luck and thanks, Rick rlohr@berkshire.rr.com http://www.rdlohr.com/ Attached Thumbnails __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com Last edited by rdlohr; 02-03-2011 at 06:56 PM..

10-26-2009, 07:02 PM	#2 (permalink)
LITHIUMSTATIC Registered Users My HF Map location Join Date: May 2006	__________________ Just a guy and his heli....

10-27-2009, 09:09 AM	#4 (permalink)
acidla Registered Users Join Date: Jul 2007	When this mount will be available at readyheli? I would like to order it along with the mini vbar. Cheers __________________ \|Michalis\| ...let the flying be second nature!

10-27-2009, 09:37 AM	#5 (permalink)
rdlohr HF Support Thread Starter My HF Map location Join Date: May 2006	I only turn products over to Ready when they hit a certain volume of sales. In the mean time, you can order from me direct. rlohr@nycap.rr.com Just specify TREX 500 VBAR Mount. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

10-27-2009, 11:00 AM	#6 (permalink)
acidla Registered Users Join Date: Jul 2007	Email sent! __________________ \|Michalis\| ...let the flying be second nature!

11-15-2009, 07:01 PM	#7 (permalink)
rdlohr HF Support Thread Starter My HF Map location Join Date: May 2006	I posted a better picture that more accurately shows the length. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

12-17-2009, 08:00 PM	#8 (permalink)
soarman Registered Users Join Date: Dec 2007	Thanks Rick! Sorry took so long to reply, fit's great and fly's Great, nice and neat setup. Thanks Steve Attached Thumbnails

12-17-2009, 11:16 PM	#10 (permalink)
soarman Registered Users Join Date: Dec 2007	Comes out as one unit, very clean. Steve

12-18-2009, 05:11 AM	#11 (permalink)
rdlohr HF Support Thread Starter My HF Map location Join Date: May 2006	Cool. Next time you have it out, snap a photo of it if you think about it. Very nice! Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in