Register Now

aquaanox · 08-04-2012, 08:40 PM

Quote:

Originally Posted by Vinger

All radios have quad gimbals! Maybe you meant if it has ball races on all the gimbals, yes it does.

doh.. typo.. i meant does it have quad bearings for the sticks. i dont see that advertized anywhere for it.

JamesGreen · 08-12-2012, 01:07 PM

Telemetry is cool but would be good to have a max setting on the Tx, for things like altitude/temp etc.

Anyone found this at all? I know you can set alarms, but would like to be able to see max values after each flight.

sircol · 08-12-2012, 05:24 PM

records max and min of the flight for each of the sensors that you use

JamesGreen · 08-12-2012, 05:59 PM

Thanks! Where does it show this? Are u able to post a picture.

Vinger · 08-12-2012, 11:05 PM

Quote:

Originally Posted by KnifeEdgeUk

Thanks! Where does it show this? Are u able to post a picture.

See page 75 of the XG8 English manual, max and min values are recorded and displayed when you click on the telemetry value. Alarms can be set for various values. The only exception is altitude where only the max value is displayed.

JamesGreen · 08-13-2012, 01:18 AM

Thanks. I take it the XG11 is the same?

Vinger · 08-13-2012, 02:06 AM

Quote:

Originally Posted by KnifeEdgeUk

Thanks. I take it the XG11 is the same?

Exactly the same.

JamesGreen · 08-13-2012, 11:00 AM

Quote:

Originally Posted by Vinger

Exactly the same.

Thanks mate!!

aquaanox · 08-15-2012, 08:13 PM

Anyone know if the "Stick Position Switch" function and virtual switch is essentially the same thing as the built in sequencer in the dx18 ? thanks

Vinger · 08-16-2012, 11:43 PM

Quote:

Originally Posted by aquaanox

Anyone know if the "Stick Position Switch" function and virtual switch is essentially the same thing as the built in sequencer in the dx18 ? thanks

The XG11 has six virtual switches that can switch other functions either ON/OFF or OFF/ON. They can be freely assigned to any stick and any position, even to switch separately with the same stick on either side of any desired position.Yes you can use these virtual switches to sequence other functions or mixers and timers.

Sorry not familiar with the DX18, so cannot comment on that.

aquaanox · 08-17-2012, 09:18 AM

Quote:

Originally Posted by Vinger

The XG11 has six virtual switches that can switch other functions either ON/OFF or OFF/ON. They can be freely assigned to any stick and any position, even to switch separately with the same stick on either side of any desired position.Yes you can use these virtual switches to sequence other functions or mixers and timers.

Sorry not familiar with the DX18, so cannot comment on that.

thanks. good info.. its not very clear in the online manual (they should hire you

)

ElIntocable · 08-24-2012, 04:46 PM

I got my XG11 today! Here are some pics:

Click image for larger version

Name: 20120824_150608.jpg
Views: 244
Size: 89.5 KB
ID: 343245

Click image for larger version

Name: 20120824_150701.jpg
Views: 252
Size: 66.6 KB
ID: 343246

Click image for larger version

Name: 20120824_151000.jpg
Views: 242
Size: 122.5 KB
ID: 343247

Click image for larger version

Name: 20120824_151130.jpg
Views: 1138
Size: 107.5 KB
ID: 343248

Click image for larger version

Name: 20120824_151221.jpg
Views: 261
Size: 105.0 KB
ID: 343249

Click image for larger version

Name: 20120824_151254.jpg
Views: 560
Size: 86.3 KB
ID: 343250

Click image for larger version

Name: 20120824_151339.jpg
Views: 520
Size: 97.0 KB
ID: 343251

aquaanox · 08-24-2012, 05:15 PM

thanks for the pics. i thought these had a black case ? looks just like the 11x no ?

ElIntocable · 08-24-2012, 05:21 PM

While I haven't seen my buddies 11X in a while, it looks the same except for the "titanium gunmetal" finish and the red sticks.

aquaanox · 08-24-2012, 05:23 PM

Quote:

Originally Posted by ElIntocable

While I haven't seen my buddies 11X in a while, it looks the same except for the "titanium gunmetal" finish and the red sticks.

ah. ok. so its not silverish like the 11x.. hard to tell from the pics.

ElIntocable · 08-24-2012, 05:43 PM

Quote:

Originally Posted by aquaanox

ah. ok. so its not silverish like the 11x.. hard to tell from the pics.

Yeah. The color of the XG11 is nice than the 11X IMHO. It looks sharp.

ChrisMH · 08-24-2012, 06:09 PM

Did you get it from Horizon?

Is so, what is he FCC number on the back?

Thanks

ElIntocable · 08-24-2012, 06:51 PM

Quote:

Originally Posted by ChrisMH

Did you get it from Horizon?

Is so, what is he FCC number on the back?

Thanks

Yes.

AXG-RF1TPA2C Why do you want the FCC ID? Just curious.

I bought one from RC711, but it didn't have an FCC ID. I sent it back for a refund. Should be in there hands any day now...

ChrisMH · 08-24-2012, 07:06 PM

So I can print it on a label and stick it on the back of my XG11 from eBay!

Does the Horizon version have the switches reversed? Trainer on the right, hold on the left?

ElIntocable · 08-24-2012, 07:27 PM

Quote:

Originally Posted by ChrisMH

So I can print it on a label and stick it on the back of my XG11 from eBay!

Does the Horizon version have the switches reversed? Trainer on the right, hold on the left?

You sneaky bastard!

Yes, the momentary switch is on the right.

08-12-2012, 05:24 PM	#63 (permalink)
sircol Registered Users Join Date: Nov 2008 Location: QLD, Australia	records max and min of the flight for each of the sensors that you use __________________ JR 11XG DMSS the only way to go , xcell 60 xcell 60 SE jet ranger xcell 60 mechanics now electric T rex 700e, beastx V1, Trex 700 F3c V2, Trex 500 stock ,trex 500 fbl (beastx ) , 500 scale ,Trex 550e , MFA 500,.Micromold Lark

08-24-2012, 04:46 PM	#72 (permalink)
ElIntocable Registered Users Join Date: May 2010	I got my XG11 today! Here are some pics: __________________ Planes: Crack Yak, Habu, F-27Q Stryker, T-28D, UM P-51D, P-51 BL, UM SU-26XP, P-47D, UMX Beast v1 & 3D, UMX Sbach 342, UMX Extra 300 3D, UM F-27Q Stryker, H9 Mustang 40, UM Mosquito, Sky Angel 650mm Mustang/550mm FW190, FMS B-25, 64mm Mig-15 XG11 DX8

08-24-2012, 05:21 PM	#74 (permalink)
ElIntocable Registered Users Join Date: May 2010	While I haven't seen my buddies 11X in a while, it looks the same except for the "titanium gunmetal" finish and the red sticks. __________________ Planes: Crack Yak, Habu, F-27Q Stryker, T-28D, UM P-51D, P-51 BL, UM SU-26XP, P-47D, UMX Beast v1 & 3D, UMX Sbach 342, UMX Extra 300 3D, UM F-27Q Stryker, H9 Mustang 40, UM Mosquito, Sky Angel 650mm Mustang/550mm FW190, FMS B-25, 64mm Mig-15 XG11 DX8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2012, 01:07 PM	#62 (permalink)
JamesGreen Registered Users Join Date: Mar 2008	Telemetry is cool but would be good to have a max setting on the Tx, for things like altitude/temp etc. Anyone found this at all? I know you can set alarms, but would like to be able to see max values after each flight.

08-12-2012, 05:59 PM	#64 (permalink)
JamesGreen Registered Users Join Date: Mar 2008	Thanks! Where does it show this? Are u able to post a picture.

08-13-2012, 01:18 AM	#66 (permalink)
JamesGreen Registered Users Join Date: Mar 2008	Thanks. I take it the XG11 is the same?

08-15-2012, 08:13 PM	#69 (permalink)
aquaanox Registered Users Join Date: Feb 2010	Anyone know if the "Stick Position Switch" function and virtual switch is essentially the same thing as the built in sequencer in the dx18 ? thanks

08-24-2012, 05:15 PM	#73 (permalink)
aquaanox Registered Users Join Date: Feb 2010	thanks for the pics. i thought these had a black case ? looks just like the 11x no ?

08-24-2012, 06:09 PM	#77 (permalink)
ChrisMH Registered Users Join Date: May 2009	Did you get it from Horizon? Is so, what is he FCC number on the back? Thanks

08-24-2012, 07:06 PM	#79 (permalink)
ChrisMH Registered Users Join Date: May 2009	So I can print it on a label and stick it on the back of my XG11 from eBay! Does the Horizon version have the switches reversed? Trainer on the right, hold on the left?

Register Now

Log-in