helibug conversions

[Atomic Skull]

Originally Posted by neverhappy

I have all his design files for the Morphis so if I need a part and have a place to make it. It's part of the kit when you buy it from him. So your thinking well people can just make their own Heli's and sell them right.. well you sign a waiver that you won't share the files and they are only for your personal use..

Also Loz, continues to email me as of today we have done it twice today on his new designs on the main gear.. and generator gears.


He continues research and development on the Morphis. At the end of the day he is one of us. He flys his product and trying to find weak points so improvements can be made..

I realize their are other supplie for gasser. But I see a lot of them drying up.

Just my two cents
Jeff

Where can you get the carbon fiber parts like the belt tail unit printed?

[Azalin]

I'm not standing by anyone but I still have my HB 700 and its still great. Maybe not the best in the world but its great.

The weakest point of it was the align clutch system but with the lynx gas clutch that problem was solved.

Sent from Shadowmoon Valley

[rhodesengr]

not sure if anyone mentioned this but the way I read it, the existing HB designs are staying in production. Just no new ones. I guess a some point, the Align models will move past the frames that you can convert to HB gassers and then you won't be able to get parts.

[neverhappy]

I'm not saying anything bad against any conversion out there. I'm just saying I'm building the Morphis because it's one out there and after researching I liked it.

As far as 3D printing I'm in the same boat as where to get things printed. Loz, gives that opinion in case something happens to him or you think it's faster to have it printed.

[Atomic Skull]

Originally Posted by neverhappy

I'm not saying anything bad against any conversion out there. I'm just saying I'm building the Morphis because it's one out there and after researching I liked it.

As far as 3D printing I'm in the same boat as where to get things printed. Loz, gives that opinion in case something happens to him or you think it's faster to have it printed.

So it's shipping with the 3DP belt tail now then?

[whiskey29]

Originally Posted by neverhappy

I'm not saying anything bad against any conversion out there. I'm just saying I'm building the Morphis because it's one out there and after researching I liked it.

As far as 3D printing I'm in the same boat as where to get things printed. Loz, gives that opinion in case something happens to him or you think it's faster to have it printed.

http://www.shapeways.com
Do they have material strong enough for the tail case or the auto gear ?
They can do aluminum.
This place is being used for the parts for http://www.oblivion-heli.com

[vitamin]

this is the last reply I got from this indian living in the USA
I was just asking why he did select the Evolution 10GX engine for his small gasser prototype
( another fail project that will never see the light like his old 4 stroke gasser)

he told me it's the best engine of the market and then I asked him why because it doesn't even come with a piston ring or conecting rod bearings.
beyond this it's an engine for airplanes usage without heli cooling head
otherwise I'm sure Evolution would have made a special version for helis
I suppose he has tested all other similar gas engines of the market >>>> GO, RCGF, NGH, OS...etc


you can cry all you want....few emails ago, you were licking my toes to get some info out of me haha
you can also shove you sale up your butthole my dear
F*CK OFF !

[in2deep]

Might be time to switch to decaf...

[banshee rider]

Originally Posted by vitamin

this is the last reply I got from this indian living in the USA
I was just asking why he did select the Evolution 10GX engine for his small gasser prototype
( another fail project that will never see the light like his old 4 stroke gasser)

he told me it's the best engine of the market and then I asked him why because it doesn't even come with a piston ring or conecting rod bearings.
beyond this it's an engine for airplanes usage without heli cooling head
otherwise I'm sure Evolution would have made a special version for helis
I suppose he has tested all other similar gas engines of the market >>>> GO, RCGF, NGH, OS...etc


you can cry all you want....few emails ago, you were licking my toes to get some info out of me haha
you can also shove you sale up your butthole my dear
F*CK OFF !

Wow I wouldn't think that this would meet the HF motto Fun, Learning, Friendship and Mutual Respect

[rdlohr]

Originally Posted by banshee rider

Wow I wouldn't think that this would meet the HF motto Fun, Learning, Friendship and Mutual Respect

Correct. Clone account banned.
Rick

[exhogflyer]

In defense of Helibug, how much do you think he actually makes selling gas heli kits for such a small market corner? Can't say I blame the guy. BTW I have one of his gas conversion kits for a Trex 700 and thought it pretty nice.

[Ksnyder]

I have a trex 700N DFC Helibug conversion. That thing flies so nice and smooth i love it. Now as i progress as a pilot that might change but I also know that gassers don't have all the power an electric has to just keep pulling through the air. When i saw that news it worried me a little but figured well if It goes in that bad and helibug doesnt have the parts then i guess I would get a whiplash kit and move all the good parts to there.

[Atomic Skull]

Originally Posted by Ksnyder

I have a trex 700N DFC Helibug conversion. That thing flies so nice and smooth i love it. Now as i progress as a pilot that might change but I also know that gassers don't have all the power an electric has to just keep pulling through the air. When i saw that news it worried me a little but figured well if It goes in that bad and helibug doesnt have the parts then i guess I would get a whiplash kit and move all the good parts to there.

Whiplash uses a PUH not an RC.

[fastflyer20]

Originally Posted by Atomic Skull

Whiplash uses a PUH not an RC.

Nope, the Whiplash uses an RC format.

[rhodesengr]

Originally Posted by Ksnyder

When i saw that news it worried me a little but figured well if It goes in that bad and helibug doesnt have the parts then i guess I would get a whiplash kit and move all the good parts to there.

The way I read the helibug statement was that they are not coming out with new products. I am pretty sure they said that exisiting parts and kits would continue to be available.