Had a short glitch with XG14 and 8 ch Xbus reciever

[Four Stroker]

The transmitter saves the min/max values even after the receiver is turned off. They are gone when you turn off the transmitter. But the current values disappear in a few seconds after turning off the receiver.

[mverhorst]

Thanks everyone...

[mverhorst]

So life and weather gave me a break today.

Decided to do an extensive range test with two persons (Big thanks to TdB).

We could not get the heli to twitch under normal range test conditions and pulling and tugging all the wires.

Did 4 flights, no glitches, no warnings and Min/Max Rx voltage in my Tx where 6.1 and 6.3.

So for now we did not find anything, so I still have no clue.

The new RX should be here by monday or so, I will use that one and see what happens.

I'll keep you posted.

[Four Stroker]

The time to look at the min/max RX voltage is after you do have a glitch. Don't forget and turn off the TX the next time it happens.

[mverhorst]

Originally Posted by Four Stroker

The time to look at the min/max RX voltage is after you do have a glitch. Don't forget and turn off the TX the next time it happens.

I know, just want to give a small update to let you all know that it is still worked on.

I quess I need more stick time.

Fall is here so it will be a windy and rainy season before it gets cold

[mverhorst]

All,

Small update. Aerial arrived as the new XBus receiver.

When out flying again but did not had time to sort things out. Did four throuble free flights.

Not sure what was wrong bjt but it seems okay for now.

I did go over the entire machine but could not found anything wrong...