IS THERE ANOTHER FAN THAT FITS THE FRENZY

[jynxxxy]

hey doe anyone have the raptor fan shroud, is it close to the frenzys shroud, or can it be used twith some mod to the frame, for a better fit, i have the raptor clutch bell and clutch in my frenzy. i have the tt53 with a os 50 hyper carb modded on it,and i kept breaking the frenzy clutch(one hot start )because the frenzy clutch is made from soft metal,not like the raptors.i have been trying to find a torque tube setup that i can mod to fit the frenzy. i had the velocity front gear, the bevel gear mounted on the top of the belt drive unit and i put the velocity tt boom setup on my frenzy but it made the tail to short,i would have to find a longer torque tube and mod it .like cutting down a 90 torque tube to fit. i will find some way to have a tt setup on my frenzy, im sick of the tail boom sliding in and having a loose belt.im going to try the 90 metal tail boom brackets and see how they fit.

[JMAV]

have you tried balancing your hub and fan?

[jynxxxy]

yea i dial indicated them, the plastic fan on the stock fan mount is crap, it comes loose from the metal and then you either have to get a new one or deal with wobble.i got a new one and got it turned to hit the high spots now it is a problem of the past.

[Andriyka]

IS THERE ANOTHER FAN THAT FITS THE FRENZY

Without changes, I did not find ...

[AGM F.Cruz]

hi!user23, did you maded new holes on the engine mount too?can you explain a little better cause my english is awful and i still can't understand what you did on your frenzy

[Rollin_3z]

Besides modding the frame for the Raptor fan, there must be another fan. The runout on my fan is 5 thou, vibrates too much. Anyone know?

[matrix1171]

anybody took a closer look at the vibe 50?