Register Now

duytang · 02-25-2012, 11:10 AM

Are metal gears necessary for Flybarless? I have heard some people say use plastic because they will break in a crash instead of frying the servo, others say use metal because there is more stress from fbl setups.

So I need some help, and even servo reccomendations that don't break the bank.

Thanks

fuzzyllamma · 02-25-2012, 11:17 AM

I personally prefer metal gear because of bad experiences with nylons stripping. I would assume that because the servos are much more active when flying flybarless that they are more prone to wear. I know some guys prefer nylon because they break easily in a crash and save the servo, but if you arent crashing as often, why risk stripping a gear midflight? The best servos for a rex 450 are the mks ds95. These are expensive but are lightning fast, durable and look sweet. Lots of guys will argue against this but i love mine and will be sticking with em.

duytang · 02-25-2012, 11:19 AM

Thanks for the reply, that makes sense. I forgot to mention I have a trex 500

fuzzyllamma · 02-25-2012, 04:05 PM

Ah, yes and i thought i read ds410. Oh well same deal

02-25-2012, 11:10 AM	#1 (permalink)
duytang Registered Users Join Date: Nov 2011	DS510 or DS510M with Flybarless? Are metal gears necessary for Flybarless? I have heard some people say use plastic because they will break in a crash instead of frying the servo, others say use metal because there is more stress from fbl setups. So I need some help, and even servo reccomendations that don't break the bank. Thanks __________________ I'm getting out of the hobby so if you need to contact me, you can email me at my Paypal address if I don't reply on here. Thanks

02-25-2012, 11:19 AM	#3 (permalink)
duytang Registered Users Thread Starter Join Date: Nov 2011	Thanks for the reply, that makes sense. I forgot to mention I have a trex 500 __________________ I'm getting out of the hobby so if you need to contact me, you can email me at my Paypal address if I don't reply on here. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2012, 11:17 AM	#2 (permalink)
fuzzyllamma Registered Users Join Date: Dec 2011	I personally prefer metal gear because of bad experiences with nylons stripping. I would assume that because the servos are much more active when flying flybarless that they are more prone to wear. I know some guys prefer nylon because they break easily in a crash and save the servo, but if you arent crashing as often, why risk stripping a gear midflight? The best servos for a rex 450 are the mks ds95. These are expensive but are lightning fast, durable and look sweet. Lots of guys will argue against this but i love mine and will be sticking with em.

02-25-2012, 04:05 PM	#4 (permalink)
fuzzyllamma Registered Users Join Date: Dec 2011	Ah, yes and i thought i read ds410. Oh well same deal

Register Now

Log-in