Register Now

avatar71 · 12-21-2006, 06:48 PM

will the tp extreme 6s1p 5000 or the fp 4900's fit in a swift?

pjpg · 12-21-2006, 08:48 PM

Yes they will fit . I had to trim the canopy to get proper balance.

avatar71 · 12-21-2006, 09:07 PM

thanks! what's your setup?

pjpg · 12-22-2006, 12:11 AM

I was running a neu 1907/1.5 . I was breaking in the tp 5000 pack for my trex 600. I didnt push the pack hard or see what duration i could get.

RAV50 · 12-22-2006, 10:22 PM

I do not know about the TP pack. But I am aware of two different configurations of the Flight Power 6S1P/4900 packs. The one configured with two stacks of three cell joined lengthwise, is too long and would have to stick out the front, well past the nose (and a lot of canopy would have to be cut away) in order to keep the CofG where it should be.

On the other hand, their 6S1P/4900 pack that is configured like the 6S1P/3700 packs (6 cells stacked on each other) will fit easily with just a bit of canopy trimming on the bottom.

avatar71 · 12-23-2006, 06:11 AM

anyone got pics of the install?
thanks!

12-21-2006, 06:48 PM	#1 (permalink)
avatar71 Registered Users Join Date: May 2006	packs fit? will the tp extreme 6s1p 5000 or the fp 4900's fit in a swift?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-21-2006, 08:48 PM	#2 (permalink)
pjpg Registered Users My HF Map location Join Date: Jun 2006	Yes they will fit . I had to trim the canopy to get proper balance.

12-21-2006, 09:07 PM	#3 (permalink)
avatar71 Registered Users Thread Starter Join Date: May 2006	thanks! what's your setup?

12-22-2006, 12:11 AM	#4 (permalink)
pjpg Registered Users My HF Map location Join Date: Jun 2006	I was running a neu 1907/1.5 . I was breaking in the tp 5000 pack for my trex 600. I didnt push the pack hard or see what duration i could get.

12-22-2006, 10:22 PM	#5 (permalink)
RAV50 Join Date: Mar 2005	I do not know about the TP pack. But I am aware of two different configurations of the Flight Power 6S1P/4900 packs. The one configured with two stacks of three cell joined lengthwise, is too long and would have to stick out the front, well past the nose (and a lot of canopy would have to be cut away) in order to keep the CofG where it should be. On the other hand, their 6S1P/4900 pack that is configured like the 6S1P/3700 packs (6 cells stacked on each other) will fit easily with just a bit of canopy trimming on the bottom.

12-23-2006, 06:11 AM	#6 (permalink)
avatar71 Registered Users Thread Starter Join Date: May 2006	anyone got pics of the install? thanks!

Register Now

Log-in