Raptor e550 flybarless RTF or receiver ready.

[litespeed]

I decided I want to go back to a 90 sized electric and need funds for that.

Raptor e550 airframe
Outrage flybarless head
Rondo flybarless unit and programmer
CC Ice 100 esc
CC BEC Pro
Scorpion 4020-1100 with 12 tooth pinion oiled every 6 flights
Align DS610 cyclic servos
Align DS650 tail servo
Futaba R617FS 7 channel receiver
TT 140 degree swash plate
TT stainless steel tail hub upgrade
Mavrikk G5 550 Wide cord mains
KBDD 92mm tail blades

And tons of extra parts including new in package TT parts, Mavrikk parts and Outrage flybarless head parts, see pictures. I don't like to be without parts as you can see.

The heli fly's fantastic and has tons of power. I have the ESC on set-rpm mode at 2150rpm. This set-up gives me 7 mins of flight time (mix of sport/ light 3D and hovering!) and puts back 3200 mah back into a 5000 pack. 8 1/2 mins is very do-able but 7 is more than enough for me. The Rondo is an easy to set-up flybarless system. I had it upgraded to V2 before it's first flight. I flew on Turnigy 6s 5000mah 30 and 35C packs. Everything comes down cool except the motor hits 125 max on a 90 degree + day. Mechanically the heli is perfect in every way. Visually the canopy has some light rash on it from a crash or two but the rest of the heli is perfect. I had a bad receiver earlier this year. I kept this canopy because it's the lightest plastic canopy I have ever had and strong as anything on the market. I don't know what else to say so I'll wait for questions. The motor, esc, bec, all servos, flybarless head and Rondo are less than 6 months old. I will offer the heli with the Mavrikk G5's or Rotortech 550's or V-Blade 550. Which ever you prefer. No battery included!

Pricing;

Heli ready to bind and fly with parts $875 shipped
Heli minus receiver with parts $775 shipped

Only trades I'd be interested in are towards a T-rex 700e 3G or Logo 600SE.

I will entertain parting the heli out if I can get more than 60% of it sold off,

Heli airframe $325 including head, tail blades and parts
Motor $90
ESC $90
BEC $30
DS610 x 3 $135
DS650 $55
Rondo v2 w controller $200
Mavrikk G5 550 wides $50


All prices shipped in the lower 48.

Tom

[litespeed]

PM answered.

Tom