Massive Gaui 200 parts sale

[BHChieftain]

I have probably a hundred brand new-in-the-bag parts for my beloved Gaui 200. Alas, my aging eyes are not longer motivated to work on her-- I need something bigger to see... Before I bother listing all my new spares and used components, is anyone interested in stocking up on spare parts? I have everything from brand new canopies, belts, booms, struts, landing gear, tail parts, rotor parts, shafts,blades, etc... probably everything except main frames. I'll also be selling my used hyperion servos and motors pennies on the dollar.

Let me know if there is any interest-- if so I'll take an inventory with specifics.

Chief

[BHChieftain]

Ok, got some interest. Here is a PARTIAL inventory, I also have a bunch of used and open parts packs which I will also toss in,

1 canopy-new in box
1 canopy- used
1 flybar head, used in good condition with Align 205D blades
1 new set of align 205D blades
1 901503- 15T pinion
3 203209 boom supports
1 BW tail- used good condition with new belt
1 main gear and OWB , used, good condition
2 203542 main gear and OWB
1 203466 lower frame
1 203633 CNC tail boom clamp
3 203533 CF tail push rods
1 gaui 200 pitch gauge
9 203183 landing gear
2 1/2 203261/262 landing gear struts
4 203240 flybar-short
1 203423 flybar-long
2 203191 tail boom-belt (2 in each pack)
2 203197 tail boom-shaft
1 203529 tail servo mounts
1 203233 upper mast collars
1 203151 idler pulleys
2 203639 tail hub
lots of tail blades
1 gaui 5600kv motor new
1 z-power 5150 motor used, good condition
1 203231 mast collars
1 203232 main pulley collars
1 203241 FB weights
3 207010 16T tail shafts
lots of rotor damper rings
lots of canopy grommets
7 203853 spindles
3 207020 H255 tail hubs (for BW tail)
1 203329 swashplate guide
1 207025 H255 tail pitch slider (for BW tail)
2 203852 spindles
3 203849 spindles
full bearing set plus some...
screws, balls, links
1 used Hyperion DS09 GMD tail servo, lightly used

Plus my old bird which has good frames,screws,bolts, etc. The cyclic servos have cracked tabs, but the gears/motors are good, and I'll keep the Quark and RX.

I don't want to part this out-- this is probably 500-800 in new parts plus a bunch of used and partially open parts. I'll ship the entire lot CONUS for $200. If outside of US, it will be $180 plus shipping.

Cheers,
Chief

[BHChieftain]

Found another bag with new belt and a bunch of open parts for flybar head... all included.

[BHChieftain]

Added a picture. Also wanted to highlight that in the mix includes 2 motors (1 new 1 used, including the prized z-power 5150, very hard to find these days), a Hyperion DS09GMD tail servo (low miles, I had just replaced it), and a Bobby Watts tail (plus extra hubs/slider for it).

Chief

[DMala]

I thought that you and I and maybe a few others would fly the EP200 forever.....

[fusionsx00]

Lol, i still have mine

But it is in a display case

[BHChieftain]

About once a year I think about selling it, I manage not to close a deal, then happily fly it for another year.... I just might break down and buy the one part I need...

Chief

[BHChieftain]

Well, I got a buyer.... I'm sure I'll regret selling her...
At least I can focus on my other project--, check out the MSH Protos section, I'm doing an A109 coast guard scale with a protos stretch.

Chief

[Kevinfly]

Its going to a good place and will eventually be a scaler as well. Thanks for the smokin deal. I look forward to following your build.:

[BHChieftain]

Send some pics and vids when you get her together. Feel free to ping me with any questions-- I know that bird inside and out!
Chief


Sent from my XT890 using Tapatalk 2