Register Now

BigDave76 · 04-25-2011, 06:07 PM

I searched, and cant find settings for the DX6i and MCX2??? Please help.

Pfloyd · 04-25-2011, 06:25 PM

Here ya go!

Set up List
Model Type-heli
reverse-N(all of them)
Swash Type-90*1 servo
D/R Combi-D/R SW: ELEV

Adjust List
Be sure Elev D/R switch is in the 0 position to enter the first set of numbers.
AILE 0 100%-20%
ELEV 0 100%-20%
RUD 0 100%-20%
Now flip the Elev D/R switch to 1 to enter the next set of numbers
AILE 1 100% +15%
ELEV 1 100% +15%
RUDD 1 100% +15%
GYRO
RATE SW-GYRO
0:<100.0%
1: 0.0%

Throttle CUR
NORM +POS L 0.0%
pos 2 30.0%
pos 3 45.0%
pos 4 60.0%
pos H 75.0%
STUNT pos L 0.0%
pos 2 40.0%
pos 3 60.0%
pos 4 80.0%
pos H 100.0%
HOLD -0.0%

MIX 1
RUDD> ELEV ACT
RATE D +31% U +36%
SW ON TRIM INH

MIX 2
INH

BigDave76 · 04-25-2011, 06:49 PM

THANK YOU PFLOYD!!!!!!!!!!!!!!!!!!!!!

Pfloyd · 04-25-2011, 07:42 PM

No problem....

J-son600 · 05-16-2011, 01:23 AM

Gonna have to try these settings. Bound my mCX to my DX6i tonight, changed nothing but model name. Flew very nice with no programing, be interesting to see how she does with this set up.

scotsoft · 05-16-2011, 02:40 AM

Thanks for posting those settings, I am going to try them right now

Jonne_5 · 05-16-2011, 05:10 AM

Do you know if this is the same setup for mine spektrum DX7 and Trex 450 pro?

Ron34238 · 06-21-2011, 08:19 PM

Phloyd - how about your Dx6i settings for both the MCX and the Tandem Rescue?

Pfloyd · 06-22-2011, 12:29 AM

Actually, I don't have a DX tx. I just google the settings for bigdave.

megawhacker · 06-22-2011, 10:17 PM

Quote:

Originally Posted by Pfloyd

Actually, I don't have a DX tx. I just google the settings for bigdave.

Ron34238 · 06-23-2011, 10:58 AM

Quote:

Originally Posted by Pfloyd

Actually, I don't have a DX tx. I just google the settings for bigdave.

Thanks, Pfloyd. After receiving you reply, I then googled and found the same ones you came up with.

BigDave76 · 06-24-2011, 06:36 PM

Thanks PinkFloyd, I actually had to adjust the throttle setting... the settings you provided compinsated perfectly for the "clack of death" I can turn in both directions at full speed really tightly with no issues what so ever, but the throttle settings are a bit harsh. It cuts the blades out at about mid stick. I adjusted the throttle curve to respond like it did fresh out of the box.

Ron34238 · 06-24-2011, 07:07 PM

BigDave -- did you just get around to trying these out now?

BigDave76 · 06-25-2011, 10:47 PM

Quote:

Originally Posted by Ron34238

BigDave -- did you just get around to trying these out now?

I tried PF's settings the day he offered them to me, but didnt like the throttle settings, and quickly adjusted them after I noticed how harsh the curve was.

Ron34238 · 06-26-2011, 07:35 AM

Quote:

Originally Posted by BigDave76

I tried PF's settings the day he offered them to me, but didnt like the throttle settings, and quickly adjusted them after I noticed how harsh the curve was.

Would you mind sharing the current throttle settings you are using?

davidvm3 · 02-12-2012, 11:01 PM

how about now?

big dave?

Also, what does this do?
MIX 1
RUDD> ELEV ACT
RATE D +31% U +36%
SW ON TRIM INH

Lastly, I am a bit of a noob obviously. So which switch changes to stunt with these settings?

EDIT: NVM I got it!

Thanks,
David

Pfloyd · 02-12-2012, 11:21 PM

BigDave hasn't been on here since last June......(:

Mini Tmaxx · 05-01-2012, 08:55 PM

Quote:

Originally Posted by Pfloyd

Here ya go!

Set up List
Model Type-heli
reverse-N(all of them)
Swash Type-90*1 servo
D/R Combi-D/R SW: ELEV

Adjust List
Be sure Elev D/R switch is in the 0 position to enter the first set of numbers.
AILE 0 100%-20%
ELEV 0 100%-20%
RUD 0 100%-20%
Now flip the Elev D/R switch to 1 to enter the next set of numbers
AILE 1 100% +15%
ELEV 1 100% +15%
RUDD 1 100% +15%
GYRO
RATE SW-GYRO
0:<100.0%
1: 0.0%

Throttle CUR
NORM +POS L 0.0%
pos 2 30.0%
pos 3 45.0%
pos 4 60.0%
pos H 75.0%
STUNT pos L 0.0%
pos 2 40.0%
pos 3 60.0%
pos 4 80.0%
pos H 100.0%
HOLD -0.0%

MIX 1
RUDD> ELEV ACT
RATE D +31% U +36%
SW ON TRIM INH

MIX 2
INH

Thank you! Worked perfectly for my mcx2. Love flying it.

RoboHeli · 05-01-2012, 08:56 PM

Quote:

MIX 1
RUDD> ELEV ACT
RATE D +31% U +36%
SW ON TRIM INH

Except for this part. This is what you do for the MSR to disable the automatic mixing of elevator and rudder that the 5-in-1 does for you. Why is this here in the MCX2 settings?

seldredg · 05-06-2012, 09:42 PM

I have a new MCX2 and a DX6i, set to whatever the default is when you bind it. Works OK so far for what I'm doing using the stock pushrod position. (I just changed to the longer setting but haven't flown it yet (waiting for glue to dry). What is the effect from the default DX6i settings of the settings provided here?

And in particular, what is the affect of this setting:

MIX 1
RUDD> ELEV ACT
RATE D +31% U +36%
SW ON TRIM INH

Scott

04-25-2011, 06:07 PM	#1 (permalink)
BigDave76 Registered Users Join Date: Mar 2011	DX6i settings with MCX2 I searched, and cant find settings for the DX6i and MCX2??? Please help. __________________ Blade 120SR, RKH'd out, with custom black carbon fiber canopy, Blade MCX2 w/Microheli upgrades, Syma Fairy, T-Rex 450 Clone, DX6i with custom orange backlight.

04-25-2011, 06:25 PM	#2 (permalink)
Pfloyd Registered Users Join Date: Mar 2010	Here ya go! Set up List Model Type-heli reverse-N(all of them) Swash Type-901 servo D/R Combi-D/R SW: ELEV Adjust List Be sure Elev D/R switch is in the 0 position to enter the first set of numbers. AILE 0 100%-20% ELEV 0 100%-20% RUD 0 100%-20% Now flip the Elev D/R switch to 1 to enter the next set of numbers AILE 1 100% +15% ELEV 1 100% +15% RUDD 1 100% +15% GYRO RATE SW-GYRO 0:<100.0% 1: 0.0% Throttle CUR NORM +POS L 0.0% pos 2 30.0% pos 3 45.0% pos 4 60.0% pos H 75.0% STUNT pos L 0.0% pos 2 40.0% pos 3 60.0% pos 4 80.0% pos H 100.0% HOLD -0.0% MIX 1 RUDD> ELEV ACT RATE D +31% U +36% SW ON TRIM INH MIX 2 INH __________________ Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1* USAF RETIRED 1968-1988 Vietnam Veteran

04-25-2011, 06:49 PM	#3 (permalink)
BigDave76 Registered Users Thread Starter Join Date: Mar 2011	THANK YOU PFLOYD!!!!!!!!!!!!!!!!!!!!! __________________ Blade 120SR, RKH'd out, with custom black carbon fiber canopy, Blade MCX2 w/Microheli upgrades, Syma Fairy, T-Rex 450 Clone, DX6i with custom orange backlight.

04-25-2011, 07:42 PM	#4 (permalink)
Pfloyd Registered Users Join Date: Mar 2010	No problem.... __________________ Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran

05-16-2011, 01:23 AM	#5 (permalink)
J-son600 Registered Users My HF Map location Join Date: Mar 2011	Gonna have to try these settings. Bound my mCX to my DX6i tonight, changed nothing but model name. Flew very nice with no programing, be interesting to see how she does with this set up. __________________ Blade mCP X BL - The 3D "beater" T-Rex 250 - Current garden defense bird. LOL T-Rex 450 Pro 3GX "Scale Airwolf", WIP Kyosho Nexus 30 - "Damn I can't believe I learned on something like this........

05-16-2011, 02:40 AM	#6 (permalink)
scotsoft Registered Users My HF Map location Join Date: Feb 2011	Thanks for posting those settings, I am going to try them right now __________________ mCX, mCX S300, mCX2, mCX Tandem, mSR, 120SR, CX2, NE Solo Pro 2, NE Bravo SX, mQX, V911, V929, V939, Hubsan X4, Turnigy 9X, DX6i

05-16-2011, 05:10 AM	#7 (permalink)
Jonne_5 Registered Users Join Date: May 2011	Do you know if this is the same setup for mine spektrum DX7 and Trex 450 pro?

06-21-2011, 08:19 PM	#8 (permalink)
Ron34238 Registered Users Join Date: Apr 2011	Phloyd - how about your Dx6i settings for both the MCX and the Tandem Rescue? __________________ BL mCPx (HP05 motor/SR120 tail), Blade mCP X v2 (stock), Blade 130X, Blade mQX, Blade nQX Blade mSR X, Blade mSR, Blade mCX2 FAA 107 Licensed, AMA# 976697

06-22-2011, 12:29 AM	#9 (permalink)
Pfloyd Registered Users Join Date: Mar 2010	Actually, I don't have a DX tx. I just google the settings for bigdave. __________________ Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran

06-24-2011, 06:36 PM	#12 (permalink)
BigDave76 Registered Users Thread Starter Join Date: Mar 2011	Thanks PinkFloyd, I actually had to adjust the throttle setting... the settings you provided compinsated perfectly for the "clack of death" I can turn in both directions at full speed really tightly with no issues what so ever, but the throttle settings are a bit harsh. It cuts the blades out at about mid stick. I adjusted the throttle curve to respond like it did fresh out of the box. __________________ Blade 120SR, RKH'd out, with custom black carbon fiber canopy, Blade MCX2 w/Microheli upgrades, Syma Fairy, T-Rex 450 Clone, DX6i with custom orange backlight.

06-24-2011, 07:07 PM	#13 (permalink)
Ron34238 Registered Users Join Date: Apr 2011	BigDave -- did you just get around to trying these out now? __________________ BL mCPx (HP05 motor/SR120 tail), Blade mCP X v2 (stock), Blade 130X, Blade mQX, Blade nQX Blade mSR X, Blade mSR, Blade mCX2 FAA 107 Licensed, AMA# 976697

02-12-2012, 11:01 PM	#16 (permalink)
davidvm3 Registered Users Join Date: Dec 2011	how about now? big dave? Also, what does this do? MIX 1 RUDD> ELEV ACT RATE D +31% U +36% SW ON TRIM INH Lastly, I am a bit of a noob obviously. So which switch changes to stunt with these settings? EDIT: NVM I got it! Thanks, David

02-12-2012, 11:21 PM	#17 (permalink)
Pfloyd Registered Users Join Date: Mar 2010	BigDave hasn't been on here since last June......(: __________________ Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran

05-06-2012, 09:42 PM	#20 (permalink)
seldredg Registered Users My HF Map location Join Date: May 2012	DX6i setting question I have a new MCX2 and a DX6i, set to whatever the default is when you bind it. Works OK so far for what I'm doing using the stock pushrod position. (I just changed to the longer setting but haven't flown it yet (waiting for glue to dry). What is the effect from the default DX6i settings of the settings provided here? And in particular, what is the affect of this setting: MIX 1 RUDD> ELEV ACT RATE D +31% U +36% SW ON TRIM INH Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in