Register Now

backattack · 12-16-2011, 04:40 PM

Just ordered one!

gurdzillar · 12-16-2011, 08:00 PM

Me Too !

I flew my mcpx for a few minutes today and had a blast(untill I broke it) but I still love my msr for in the house flying during the winter.

I can't wait to compare the two msr's,

I still think the orginal will be the best choice for indoor fun

I hope don't break mine after the first couple flights like every eflite blade heli I have owned.

caseyjholmes · 12-16-2011, 10:06 PM

I want one!

Dasfriek · 12-16-2011, 11:45 PM

Quote:

Originally Posted by gurdzillar

I hope don't break mine after the first couple flights like every eflite blade heli I have owned.

Im with you on this one. The bad part is there are no replacement parts yet!
So i hope your good at home brew repairs and have tons of CF rod, CA and thread. Hopefully lots of old mSR parts that may transfer over.

petedee · 12-17-2011, 02:40 AM

Quote:

Originally Posted by Dasfriek

Im with you on this one. The bad part is there are no replacement parts yet!
So i hope your good at home brew repairs and have tons of CF rod, CA and thread. Hopefully lots of old mSR parts that may transfer over.

Just as bad as HK with the spare parts, still none available for the Solo Pro 100.

Dasfriek · 12-17-2011, 10:17 AM

I checked agon last night and it appears as if HH has about 80% of the replacement parts in stock now.
The red and orange main blades and tail rotors will be an excellent upgrade for looks anyway. They also have the new MSRX motor and ive been holding off repalcing my old one in hopes the new motor has a good increase in power so i dont have to keep my old mSR on a diet constantly.

vmax911 · 12-17-2011, 09:00 PM

Ordered my BNF last night! RTF already out of stock!

litehawkdown · 12-19-2011, 09:49 AM

I would like to have one but will save my cash. Keeps the GF off my back that way.

Ralphie · 12-19-2011, 10:37 AM

Mine shipped today, should have tomorrow, can't wait...

Ron34238 · 12-19-2011, 11:13 AM

I have no idea when they were shipped to the LHS, but I'll wait for them to get them.

vrex01 · 12-21-2011, 04:20 PM

I found all the spare parts I was looking for. You just go to shop around. Enter in the part #, you will find them all over.

Dasfriek · 12-21-2011, 09:00 PM

Spare parts arent to hard to find, But what i wonder is many head parts look just like mSR parts but with new part numbers.
I started ordering my basic spare parts kit and just the basics and i was at $60 +$10 shipping at HH. I said to heck with that and just ordered a spare BNF for parts and ill sell the main board and servos.
Its more money up front, But in the long run much cheaper.
Mainboards should be in high demand being backordered at HH and it seems no chop shops are up and running on ebay yet.

12-16-2011, 04:40 PM	#1 (permalink)
backattack Registered Users Join Date: Sep 2007	mSRX is now available at Horizon Hobby Just ordered one! __________________ Scotty Cellpro PL8, DX7, Protos, Trex 500, Trex 450S, mCPX, mCX s300, mSRX, mSR, CX2, Extreme Flight Extra300, Nieuport 17-250 Slow Flyer, Vapor, RealFlight G6 Remember: *NEVER PAY AS A GIFT!*

12-16-2011, 08:00 PM	#2 (permalink)
gurdzillar Registered Users Join Date: May 2010	Me Too ! I flew my mcpx for a few minutes today and had a blast(untill I broke it) but I still love my msr for in the house flying during the winter. I can't wait to compare the two msr's, I still think the orginal will be the best choice for indoor fun I hope don't break mine after the first couple flights like every eflite blade heli I have owned. Last edited by gurdzillar; 12-17-2011 at 12:35 PM.. Reason: spelling

12-19-2011, 11:13 AM	#10 (permalink)
Ron34238 Registered Users Join Date: Apr 2011	I have no idea when they were shipped to the LHS, but I'll wait for them to get them. __________________ BL mCPx (HP05 motor/SR120 tail), Blade mCP X v2 (stock), Blade 130X, Blade mQX, Blade nQX Blade mSR X, Blade mSR, Blade mCX2 FAA 107 Licensed, AMA# 976697

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-16-2011, 10:06 PM	#3 (permalink)
caseyjholmes Registered Users Join Date: Aug 2005	I want one!

12-17-2011, 10:17 AM	#6 (permalink)
Dasfriek Registered Users Join Date: Oct 2011	I checked agon last night and it appears as if HH has about 80% of the replacement parts in stock now. The red and orange main blades and tail rotors will be an excellent upgrade for looks anyway. They also have the new MSRX motor and ive been holding off repalcing my old one in hopes the new motor has a good increase in power so i dont have to keep my old mSR on a diet constantly.

12-17-2011, 09:00 PM	#7 (permalink)
vmax911 Registered Users Join Date: Jul 2011	Ordered my BNF last night! RTF already out of stock!

12-19-2011, 09:49 AM	#8 (permalink)
litehawkdown Registered Users Join Date: May 2011	I would like to have one but will save my cash. Keeps the GF off my back that way.

12-19-2011, 10:37 AM	#9 (permalink)
Ralphie Registered Users Join Date: Oct 2011	Mine shipped today, should have tomorrow, can't wait...

12-21-2011, 04:20 PM	#11 (permalink)
vrex01 Registered Users Join Date: Mar 2008	I found all the spare parts I was looking for. You just go to shop around. Enter in the part #, you will find them all over.

12-21-2011, 09:00 PM	#12 (permalink)
Dasfriek Registered Users Join Date: Oct 2011	Spare parts arent to hard to find, But what i wonder is many head parts look just like mSR parts but with new part numbers. I started ordering my basic spare parts kit and just the basics and i was at $60 +$10 shipping at HH. I said to heck with that and just ordered a spare BNF for parts and ill sell the main board and servos. Its more money up front, But in the long run much cheaper. Mainboards should be in high demand being backordered at HH and it seems no chop shops are up and running on ebay yet.

Register Now

Log-in