Quick Question....

[irishmatt18]

I noticed when looking at the expert menu that there was already "EXPO" of 15% in the controller. I also added expo to my TX.... Does that mean with the 15% in the controller and 20% in the TX mean I have 35% or is it a wash?

[Deet]

If you use expo on the radio you need to 0 out the expo in the vbar

expo on expo is bad karma

[satgod]

as deet said, bad karma

zero out your radio expo and set it on the vbar
and by using bank switching on the vbar you can have differnt expo rates as well as adjust cyclic performance.

if you use bank switching everything you setup bank 0 copy it to all other banks then edit the other banks for expo and agility

if you dont do this when you change banks you might get unwanted pitch curves as the default bank has your setup config you did on the vbar and the others unless you change them are at the defaults.

I have made this mistake it is a ugly mistake to make and it can be COSTLY!!!!

[Deet]

I zero out cyclic expo on the vbar and do that on my radio, but leave the tail expo set in the vbar ( and therefore 0 tail expo in radio)