Register Now

Andrillox · 09-17-2014, 06:08 PM

I read that ebar only works With DSM2 satellites and not with DSMx sattelites. Is this true? Because if it is, then the DSMx satellite I just bought specifically for this thing will have to be exchanged, which is something I rather not do.

_Kyle_ · 09-17-2014, 10:06 PM

Try contacting KDS as I haven't really seen a lot of people using the Ebar. It may take a while to get a reply here

Andrillox · 09-18-2014, 12:21 AM

Thank you _Kyle_.

ahunter852 · 09-19-2014, 11:13 AM

yup, only compatible with DSM2. i had this same problem. spent hours trying to figure out what was wrong.
they should really mention that in the manual somewhere!

Andrillox · 09-19-2014, 12:53 PM

I ended up calling Kenny at KDS and they said that it is compatible with any DSMx receiver, but if a satellite use was desired then only dsm2 works.

brownviper1966 · 10-08-2014, 02:55 PM

just wondering,

where do the single colored wires that comes with the Ebar plug in the receiver
i.e. black -> ELE

papamac · 10-31-2014, 02:45 PM

Black is aile, red is elev, white is Rudd. They plug into the aer port on Ebar

09-17-2014, 06:08 PM	#1 (permalink)
Andrillox Registered Users Join Date: Jul 2012	KDS ebar compatible with DSMX? I read that ebar only works With DSM2 satellites and not with DSMx sattelites. Is this true? Because if it is, then the DSMx satellite I just bought specifically for this thing will have to be exchanged, which is something I rather not do.

09-17-2014, 10:06 PM	#2 (permalink)
_Kyle_ Registered Users Join Date: Dec 2013	Try contacting KDS as I haven't really seen a lot of people using the Ebar. It may take a while to get a reply here __________________ \|\|Mikado Logo 480XXtreme\|\| \|Trex 450\| ~Futaba 14SG~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-18-2014, 12:21 AM	#3 (permalink)
Andrillox Registered Users Thread Starter Join Date: Jul 2012	Thank you _Kyle_.

09-19-2014, 11:13 AM	#4 (permalink)
ahunter852 Registered Users Join Date: Jun 2012	yup, only compatible with DSM2. i had this same problem. spent hours trying to figure out what was wrong. they should really mention that in the manual somewhere!

09-19-2014, 12:53 PM	#5 (permalink)
Andrillox Registered Users Thread Starter Join Date: Jul 2012	I ended up calling Kenny at KDS and they said that it is compatible with any DSMx receiver, but if a satellite use was desired then only dsm2 works.

10-08-2014, 02:55 PM	#6 (permalink)
brownviper1966 Registered Users Join Date: Sep 2011	just wondering, where do the single colored wires that comes with the Ebar plug in the receiver i.e. black -> ELE

10-31-2014, 02:45 PM	#7 (permalink)
papamac Registered Users Join Date: Apr 2013 Location: Black Diamond Washington	Black is aile, red is elev, white is Rudd. They plug into the aer port on Ebar

Register Now

Log-in