Register Now

Hekicopter · 07-20-2015, 06:03 PM

I've decided to leave the world of liquid fuel heli's and stick with electric. So, I'm parting out my 600 Nitro starting with the airframe.

I bought this airframe used about a year and a half ago because it had the DFC head. I've put about 50 flights on it with a couple of crashes. One was caused by the ball link in the carbon fiber tail rotor push rod backing out (I changed over to the stock steel rod) and the other was a tip over after landing from an auto. (See the dented tail boom).
Included is the canopy, airframe w/DFC head and main and tail blades and a new tail boom (Not Shown) to replace the dented one along with a DS620 throttle servo.

I replaced the Main and Tail rotor thrust bearings last year when I was at IRCHA. I also recently relined the clutch with the 700 liner.

The entire airframe is in very good condition. There are no bad bearings, bent shafts or cracked frames.

I'm asking $250 which includes shipping and PP fees. If you'd like to delete something just let me know and we can work it out. I'm open to any reasonable offer too.

(Look for my other ads for the extra main blades)

Hekicopter · 07-22-2015, 08:15 AM

BUMP......

If it goes for my asking price I'll throw in a complete spare tail block assembly (makes changing out a stripped TT drive gear a lot easier) and a swash leveling tool.

flysti06 · 07-22-2015, 12:12 PM

this is a great deal... im thinking about it

Mr. Superhate · 07-25-2015, 01:35 AM

Are you going to IRCHA this year? I'll be there Wed through Sun. Just wondering if you are if we could both save a little trouble if I purchased this by meeting there for me to take possession of it? Thanks.

J. Anthony
tgdd@att.net

Hekicopter · 07-26-2015, 11:02 AM

Quote:

Originally Posted by Mr. Superhate

Are you going to IRCHA this year? I'll be there Wed through Sun. Just wondering if you are if we could both save a little trouble if I purchased this by meeting there for me to take possession of it? Thanks.

J. Anthony
tgdd@att.net

I wish I was but I'll be traveling for work that week.

raptorJoe · 07-26-2015, 03:49 PM

Do I see a Cobra in the background? Is that for sale

Hekicopter · 07-26-2015, 06:12 PM

Quote:

Originally Posted by raptorJoe

Do I see a Cobra in the background? Is that for sale

Yes you do and no it isn't....

Hekicopter · 07-30-2015, 08:26 PM

Bump... Any takers?

raptorJoe · 07-31-2015, 10:18 AM

Pm sent.

Hekicopter · 07-31-2015, 06:56 PM

Sale Pending.......

rcflier1 · 08-02-2015, 02:13 PM

just saw this. pm me if the deal falls thru.

Hekicopter · 08-02-2015, 05:03 PM

Quote:

Originally Posted by rcflier1

just saw this. pm me if the deal falls thru.

Will do but it may be a few days. The potential buyer is on vacation and I agreed to hold it until he returns.

Stay tuned...

Hekicopter · 08-07-2015, 08:29 AM

It's still available......

Hekicopter · 08-10-2015, 07:53 PM

Anyone interested at all?

ChuckL · 08-11-2015, 08:27 PM

Payment Sent

07-20-2015, 06:03 PM	#1 (permalink)
Hekicopter Registered Users My HF Map location Join Date: Feb 2010	Trex 600LE Airframe with DFC head I've decided to leave the world of liquid fuel heli's and stick with electric. So, I'm parting out my 600 Nitro starting with the airframe. I bought this airframe used about a year and a half ago because it had the DFC head. I've put about 50 flights on it with a couple of crashes. One was caused by the ball link in the carbon fiber tail rotor push rod backing out (I changed over to the stock steel rod) and the other was a tip over after landing from an auto. (See the dented tail boom). Included is the canopy, airframe w/DFC head and main and tail blades and a new tail boom (Not Shown) to replace the dented one along with a DS620 throttle servo. I replaced the Main and Tail rotor thrust bearings last year when I was at IRCHA. I also recently relined the clutch with the 700 liner. The entire airframe is in very good condition. There are no bad bearings, bent shafts or cracked frames. I'm asking $250 which includes shipping and PP fees. If you'd like to delete something just let me know and we can work it out. I'm open to any reasonable offer too. (Look for my other ads for the extra main blades) Attached Thumbnails __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun" Last edited by Hekicopter; 07-21-2015 at 09:29 AM..

07-22-2015, 08:15 AM	#2 (permalink)
Hekicopter Registered Users Thread Starter My HF Map location Join Date: Feb 2010	BUMP...... If it goes for my asking price I'll throw in a complete spare tail block assembly (makes changing out a stripped TT drive gear a lot easier) and a swash leveling tool. __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun"

07-26-2015, 03:49 PM	#6 (permalink)
raptorJoe Registered Users Join Date: Mar 2011	Do I see a Cobra in the background? Is that for sale __________________ Goblin 700c, Goblin 380, Blade 450x

07-30-2015, 08:26 PM	#8 (permalink)
Hekicopter Registered Users Thread Starter My HF Map location Join Date: Feb 2010	Bump... Any takers? __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun"

07-31-2015, 10:18 AM	#9 (permalink)
raptorJoe Registered Users Join Date: Mar 2011	Pm sent. __________________ Goblin 700c, Goblin 380, Blade 450x

07-22-2015, 12:12 PM	#3 (permalink)
flysti06 Registered Users Join Date: Oct 2014	this is a great deal... im thinking about it

07-25-2015, 01:35 AM	#4 (permalink)
Mr. Superhate Registered Users Join Date: Nov 2012	Are you going to IRCHA this year? I'll be there Wed through Sun. Just wondering if you are if we could both save a little trouble if I purchased this by meeting there for me to take possession of it? Thanks. J. Anthony tgdd@att.net

07-31-2015, 06:56 PM	#10 (permalink)
Hekicopter Registered Users Thread Starter My HF Map location Join Date: Feb 2010	Sale Pending....... __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun"

08-02-2015, 02:13 PM	#11 (permalink)
rcflier1 Registered Users Join Date: Jun 2009	just saw this. pm me if the deal falls thru.

08-07-2015, 08:29 AM	#13 (permalink)
Hekicopter Registered Users Thread Starter My HF Map location Join Date: Feb 2010	It's still available...... __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun"

08-10-2015, 07:53 PM	#14 (permalink)
Hekicopter Registered Users Thread Starter My HF Map location Join Date: Feb 2010	Anyone interested at all? __________________ Nano S2, DX9, AMA33083, FA37NM3433 "Growing up leads to growing old and then to dying, and dying to me don't sound like all that much fun"

08-11-2015, 08:27 PM	#15 (permalink)
ChuckL Registered Users Join Date: Jan 2007 Location: Alanson Michigan	Payment Sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in