Register Now

daneger21 · 09-26-2011, 10:55 PM

About 40-50 flights on my stock 450 pro v2 3gx. The 3gx is mounted under the main gear and a spektrum ar6200 rx is mounted behind the anti-rotation bracket, i use a dx6i.

smaze17 · 09-27-2011, 05:23 PM

Quote:

Originally Posted by daneger21

About 40-50 flights on my stock 450 pro v2 3gx. The 3gx is mounted under the main gear and a spektrum ar6200 rx is mounted behind the anti-rotation bracket, i use a dx6i.

Hi. Your 450 looks great! Just curious, any reason you chose to not use satellites only? Your machine does still look very clean even with the receiver

S

daneger21 · 09-27-2011, 08:04 PM

Quote:

Originally Posted by smaze17

Hi. Your 450 looks great! Just curious, any reason you chose to not use satellites only? Your machine does still look very clean even with the receiver

S

To be honest, I had the rx laying around from when I had a trex250. When I sold my 250 the buyer didn't need it so I kept it. From the start of this build I wanted to be able to adjust gyro gain using my dx6i, since I knew using satellites I couldn't. BUT, now that I have it setup and flying good ill probably switch to sats and just set my gain in the 3gx software now that I know where it should be set at. Then again, other than the wiring being a pain, it works fine as is with no added cost to myself buying more pieces/parts.

Hope that made sense...

smaze17 · 09-28-2011, 10:36 PM

Cool....good looking machine

S

trexpro · 09-29-2011, 03:04 PM

nice weather today so just fly with the new Trex 450 pro V2

Click image for larger version

Name: DSC_0049.jpg
Views: 421
Size: 53.2 KB
ID: 256963

Click image for larger version

Name: DSC_0054.jpg
Views: 284
Size: 43.8 KB
ID: 256973

Click image for larger version

Name: DSC_0063.jpg
Views: 447
Size: 77.5 KB
ID: 256964

Click image for larger version

Name: DSC_0048.jpg
Views: 275
Size: 65.9 KB
ID: 256974

Click image for larger version

Name: DSC_0052.jpg
Views: 274
Size: 60.6 KB
ID: 256965

Click image for larger version

Name: DSC_0042.jpg
Views: 274
Size: 61.2 KB
ID: 256975

daneger21 · 09-29-2011, 03:43 PM

Great flight pics trexpro!

trexpro · 09-29-2011, 03:51 PM

Quote:

Originally Posted by daneger21

Great flight pics trexpro!

Thanks Daneger, It was finally nice weather here in the Netherlands

smaze17 · 09-30-2011, 11:25 PM

Yes agreed....very nice photos trexpro

Oh and nice looking heli too

S

trexpro · 10-01-2011, 01:29 AM

Quote:

Originally Posted by smaze17

Yes agreed....very nice photos trexpro

Oh and nice looking heli too

S

Thanks Smaze, I love this little heli

it flies so well with the beastX, I get so much more out of this heli.

Danny

smaze17 · 10-01-2011, 10:23 PM

Quote:

Originally Posted by trexpro

Thanks Smaze, I love this little heli

it flies so well with the beastX, I get so much more out of this heli.

Danny

Agreed

I will never fly anything other than a Beastx. As you know, it is that good

S

nard712136 · 10-02-2011, 09:14 PM

My 450 Pro (clone).

ChrisH · 10-03-2011, 12:30 AM

Quote:

Originally Posted by nard712136

My 450 Pro (clone).

I would highly recommend not mounting your FBL system with velcro.

nard712136 · 10-03-2011, 12:41 AM

You mean the Align velcro strap? any reason?

Thanks,
nard

ChrisH · 10-03-2011, 12:55 AM

Quote:

Originally Posted by nard712136

You mean the Align velcro strap? any reason?

Thanks,
nard

No, it looks like you mounted the gyro with velcro (on the bottom).

nard712136 · 10-03-2011, 01:03 AM

Ah its not a velcro strap, its a 3M Reclosable Fastener, Clear (3x more stronger than a normal strap), I use it for accessibility of the usb port on SK.

ChrisH · 10-03-2011, 01:24 AM

In other words, 3M Dual-Lock ... still not a very good thing to mount a gyro with. I would recommend foam gyro tape

nard712136 · 10-03-2011, 04:26 AM

Yup I agree, as long as I'm done and satisfied with the settings I'll permanently mount it using gyro foam tape. As of now I'm experimenting at this stage, so far i have a low vibration logs and still flies great on sport flying..

shock · 10-03-2011, 09:18 PM

Finally the software is 100%. BEASTx v2.0

Sent from chromium on Linux mint v11

kelseh · 10-08-2011, 04:19 PM

Here is another shot with my new edge blades. They fly so much better than the align blades.

Spork01 · 10-08-2011, 10:31 PM

Quote:

Originally Posted by shock

Finally the software is 100%. BEASTx v2.0

Sent from chromium on Linux mint v11

It's only 100% if you update to the v3 firmware

09-26-2011, 10:55 PM	#1161 (permalink)
daneger21 Registered Users Join Date: Feb 2011	About 40-50 flights on my stock 450 pro v2 3gx. The 3gx is mounted under the main gear and a spektrum ar6200 rx is mounted behind the anti-rotation bracket, i use a dx6i. Attached Thumbnails __________________ No I didn't misspell Daneger, my name is Dane..get it? "Flyin' high again..." -Ozzy Osbourne

09-28-2011, 10:36 PM	#1164 (permalink)
smaze17 Registered Users My HF Map location Join Date: Feb 2011	Cool....good looking machine S __________________ Trex 470LP / Beastx / Align BL50X / Align 470MX Trex 500X / Beastx / Align RCE-BL80X / Align 520MX

09-29-2011, 03:04 PM	#1165 (permalink)
trexpro Registered Users Join Date: May 2010	nice weather today so just fly with the new Trex 450 pro V2 __________________ We Men Need a Second Hobby, Besides Women Futaba, Vbar, Kontronik, Align, IKON, 3GX, Vario, WR Hercules Mikado, Scorpion, BeastX, Gens Ace, Goblin, Hyperion, JetCat Turbine, APS, BD3SX www.modelhelicopter-review.nl

09-29-2011, 03:43 PM	#1166 (permalink)
daneger21 Registered Users Join Date: Feb 2011	Great flight pics trexpro! __________________ No I didn't misspell Daneger, my name is Dane..get it? "Flyin' high again..." -Ozzy Osbourne

09-30-2011, 11:25 PM	#1168 (permalink)
smaze17 Registered Users My HF Map location Join Date: Feb 2011	Yes agreed....very nice photos trexpro Oh and nice looking heli too S __________________ Trex 470LP / Beastx / Align BL50X / Align 470MX Trex 500X / Beastx / Align RCE-BL80X / Align 520MX

10-02-2011, 09:14 PM	#1171 (permalink)
nard712136 Registered Users Join Date: Feb 2007	My 450 Pro (clone). Attached Thumbnails

10-03-2011, 12:41 AM	#1173 (permalink)
nard712136 Registered Users Join Date: Feb 2007	You mean the Align velcro strap? any reason? Thanks, nard

10-03-2011, 01:03 AM	#1175 (permalink)
nard712136 Registered Users Join Date: Feb 2007	Ah its not a velcro strap, its a 3M Reclosable Fastener, Clear (3x more stronger than a normal strap), I use it for accessibility of the usb port on SK.

10-03-2011, 01:24 AM	#1176 (permalink)
ChrisH HF Support Join Date: Aug 2007	In other words, 3M Dual-Lock ... still not a very good thing to mount a gyro with. I would recommend foam gyro tape

10-03-2011, 04:26 AM	#1177 (permalink)
nard712136 Registered Users Join Date: Feb 2007	Yup I agree, as long as I'm done and satisfied with the settings I'll permanently mount it using gyro foam tape. As of now I'm experimenting at this stage, so far i have a low vibration logs and still flies great on sport flying..

10-03-2011, 09:18 PM	#1178 (permalink)
shock Registered Users Join Date: Mar 2011	Finally the software is 100%. BEASTx v2.0 Sent from chromium on Linux mint v11 Attached Thumbnails

10-08-2011, 04:19 PM	#1179 (permalink)
kelseh Registered Users Join Date: May 2010	Here is another shot with my new edge blades. They fly so much better than the align blades. __________________ Blade 550x, Atom 500 FBL, Trex 450 Pro FBL, DX8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in