Register Now

McKrackin1 · 05-21-2010, 03:22 PM

Who uses it and what do you think of it?
Is it too complicated to set up?

ohmyers · 05-21-2010, 09:29 PM

I would like to tell you---but I have all the wires hooked up and get a blue flashing light nothing moves. If I plug servos straight into receiver they all work. Programmer says hello so it's working?

fraser1818 · 05-21-2010, 10:42 PM

Unlike other units there really is no setup in the FS600. It uses the setup in your radio.
Install the 600, about 30 seconds to calibrate the controller to your radio, check gyro direction and reverse if necessary, and go fly. The default settings flew all of my helicopters just fine. Once I took the time to adjust all the settings for each heli it was awesome. HFC has great support, call them and you will be flyin in no time.

McKrackin1 · 05-22-2010, 12:59 AM

Great.Thanks.

The price is very interesting to me.

ohmyers · 05-22-2010, 07:03 AM

Calibrate radio?

JimLerch · 05-22-2010, 07:06 AM

I flew a V2 version and it was acceptable, but it would allow the nose to climb in forward flight. The owner has a V3 replacement on the way which I'm told fixes a lot of problems.

05-21-2010, 03:22 PM	#1 (permalink)
McKrackin1 Join Date: Oct 2009	SJGD FS600 Who uses it and what do you think of it? Is it too complicated to set up?

05-22-2010, 07:06 AM	#6 (permalink)
JimLerch Registered Users My HF Map location Join Date: Nov 2007	I flew a V2 version and it was acceptable, but it would allow the nose to climb in forward flight. The owner has a V3 replacement on the way which I'm told fixes a lot of problems. __________________ James Lerch - Raptor 90, JR Vibe 500E, Gaui 550E, Xcell Razor* (*=On Loan) http://lerch.no-ip.com/atm (My homebuilt telescope site) http://lerch.no-ip.com/ChangFa_Gen (My 15KW generator project) http://www.youtube.com/profile?user=JlerchTampa (my you-tube crash videos) http://lerch.no-ip.com/Hat_Cam ("Hat Cam" for recording flights)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-21-2010, 09:29 PM	#2 (permalink)
ohmyers Registered Users Join Date: Aug 2008	I would like to tell you---but I have all the wires hooked up and get a blue flashing light nothing moves. If I plug servos straight into receiver they all work. Programmer says hello so it's working?

05-21-2010, 10:42 PM	#3 (permalink)
fraser1818 Registered Users Join Date: Aug 2008	Unlike other units there really is no setup in the FS600. It uses the setup in your radio. Install the 600, about 30 seconds to calibrate the controller to your radio, check gyro direction and reverse if necessary, and go fly. The default settings flew all of my helicopters just fine. Once I took the time to adjust all the settings for each heli it was awesome. HFC has great support, call them and you will be flyin in no time.

05-22-2010, 12:59 AM	#4 (permalink)
McKrackin1 Thread Starter Join Date: Oct 2009	Great.Thanks. The price is very interesting to me.

05-22-2010, 07:03 AM	#5 (permalink)
ohmyers Registered Users Join Date: Aug 2008	Calibrate radio?

Register Now

Log-in