Register Now

seanh · 09-24-2010, 09:32 PM

I'm wanting to see from those who have done the gasser conversion, some video of aerobatics. Some flips, rolls, loops maybe some funnels and tic tocs.

I know not to expect hard core 3d smackdown but I'd like to see what it's capable of.

I've been thinking of doing this conversion but don't want to be limited to just flying around as I like to add in the loops, flips etc.

So, lets see what the gasser conversion can do.

dcbusdriver · 10-10-2010, 08:52 PM

I don't have any video of me playing but my R90G is a great flying machine. Loops, rolls and all sport flying is great. 3D type stuff is just slower due to weight increase. My R90 3D weighs in at 10.8lbs and the R90G weighs 13.8 lbs. Here is some of the only video I have but was while still breaking in the engine. Good luck!
[ame]http://www.youtube.com/watch?v=KPbajhnSius[/ame]

Jeff396 · 10-19-2010, 08:37 AM

AWESOME!!! I want to put one of these together bad. Could you please answer a few questions.

What motor did you go with?

Which conversion kit?

Were there any issues with the clutch and fan? Did the Raptor one work or what did you use?

How about pinion selection? Are there enough options should you need to change it to get the motor in the zone?

Any other difficulties in making the conversion?

I have a Bergen Intrepid EB with a G26 stock motor that I just love but the replacement parts can get expensive. I'd like to get another gasser that I would be more comfortable beating on a bit more. I think the Raptors have the most reasonable parts prices out there and the parts availability is only second to Align. Any info you can give would be very appreciated!

Jeff

rctrooper1 · 10-25-2010, 11:41 PM

Hey David,

That is an awesome video!!!!! I know you are enjoying your conversion and it just flies awesome....Keep up the good work!!!!!

BTW, I am humbled to have a little part in your video credits....Thank you so very much....!!!!!!

Jz.

dcbusdriver · 10-28-2010, 05:21 AM

Jz,

You were a big help and deserve the credit for helping me get in the air. Thanks again!
I'll try and get some updated video of some more exciting flying soon. :-)

ChuckL · 11-23-2010, 01:07 PM

Looks awesome, is their a conversion kit you used or was it DIY.

09-24-2010, 09:32 PM	#1 (permalink)
seanh Registered Users Join Date: Feb 2007	Gasser conversion video 3D? I'm wanting to see from those who have done the gasser conversion, some video of aerobatics. Some flips, rolls, loops maybe some funnels and tic tocs. I know not to expect hard core 3d smackdown but I'd like to see what it's capable of. I've been thinking of doing this conversion but don't want to be limited to just flying around as I like to add in the loops, flips etc. So, lets see what the gasser conversion can do. __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2010, 08:52 PM	#2 (permalink)
dcbusdriver Registered Users Join Date: Apr 2008	I don't have any video of me playing but my R90G is a great flying machine. Loops, rolls and all sport flying is great. 3D type stuff is just slower due to weight increase. My R90 3D weighs in at 10.8lbs and the R90G weighs 13.8 lbs. Here is some of the only video I have but was while still breaking in the engine. Good luck! [ame]http://www.youtube.com/watch?v=KPbajhnSius[/ame]

10-19-2010, 08:37 AM	#3 (permalink)
Jeff396 Registered Users Join Date: May 2009	AWESOME!!! I want to put one of these together bad. Could you please answer a few questions. What motor did you go with? Which conversion kit? Were there any issues with the clutch and fan? Did the Raptor one work or what did you use? How about pinion selection? Are there enough options should you need to change it to get the motor in the zone? Any other difficulties in making the conversion? I have a Bergen Intrepid EB with a G26 stock motor that I just love but the replacement parts can get expensive. I'd like to get another gasser that I would be more comfortable beating on a bit more. I think the Raptors have the most reasonable parts prices out there and the parts availability is only second to Align. Any info you can give would be very appreciated! Jeff

10-25-2010, 11:41 PM	#4 (permalink)
rctrooper1 Registered Users Join Date: Jul 2007	Hey David, That is an awesome video!!!!! I know you are enjoying your conversion and it just flies awesome....Keep up the good work!!!!! BTW, I am humbled to have a little part in your video credits....Thank you so very much....!!!!!! Jz.

10-28-2010, 05:21 AM	#5 (permalink)
dcbusdriver Registered Users Join Date: Apr 2008	Jz, You were a big help and deserve the credit for helping me get in the air. Thanks again! I'll try and get some updated video of some more exciting flying soon. :-)

11-23-2010, 01:07 PM	#6 (permalink)
ChuckL Registered Users Join Date: Jan 2007 Location: Alanson Michigan	Looks awesome, is their a conversion kit you used or was it DIY.

Register Now

Log-in