T14 Stick calibration

donskills · 06-11-2012, 11:09 AM

Greets! can someone please supply me with the calibration utility AND the 1.3.1 encoder version so I can recalibrate the sticks on my TX?

Thanks in advance

nicthepic · 06-25-2012, 03:11 PM

Hi
i have the same problem.
i am unable to start the test program, what is the correct procedure?
i "downgrade " the firmware to 1.3.1, but the encoder is nont the 1.3.1.
after, i put the test program on the cf card, switch on he switch but when
the radio start, appear an error message and the radio stop.
can anyone help me, giving a link to the correct downgrade firmware?

nicthepic · 06-25-2012, 03:22 PM

Hi , can anyone help me too?
same problem, i find the test program but not the correct encoder version.

nicthepic · 06-28-2012, 03:13 AM

OK, i found them, remebar this, when you start with test program on CF, do not put the switch in upgrade mode!!!

Magnumeng · 04-22-2013, 08:47 AM

I am starting to gather the parts to replace the POTs on my 14MZ. Where do I find the software to recalibrate the sticks?

06-11-2012, 11:09 AM	#1
donskills Registered Users Join Date: Apr 2006 Location: Stockholm Sweden	T14 Stick calibration Greets! can someone please supply me with the calibration utility AND the 1.3.1 encoder version so I can recalibrate the sticks on my TX? Thanks in advance __________________ Henseleit TDR 2011,GT-5. BLS451/251, Pyro 700-52, Jive80HV, Radix 710FBL, Radix 110 tails Compass Warp 360, GT5, MKS 92/8910, Edge 60 tails. Phoenix R/C, Futaba T14MZ

06-25-2012, 03:11 PM	#2
nicthepic Registered Users Join Date: Feb 2010 Location: europe	same problem Hi i have the same problem. i am unable to start the test program, what is the correct procedure? i "downgrade " the firmware to 1.3.1, but the encoder is nont the 1.3.1. after, i put the test program on the cf card, switch on he switch but when the radio start, appear an error message and the radio stop. can anyone help me, giving a link to the correct downgrade firmware?

06-25-2012, 03:22 PM	#3
nicthepic Registered Users Join Date: Feb 2010 Location: europe	need he same Hi , can anyone help me too? same problem, i find the test program but not the correct encoder version.

04-22-2013, 08:47 AM	#5
Magnumeng Registered Users My HF Map location Join Date: Apr 2006 Location: Sneads Ferry, NC	I am starting to gather the parts to replace the POTs on my 14MZ. Where do I find the software to recalibrate the sticks? __________________ Chad Sneads Ferry, NC Futaba 14mz on 72 Hawk Pro,OS 37,GY 611 and Futaba 9402's MA FAI Tempest, YS91ST, GY601, GV-1, 9252, 9255's, CY690's, V105, V Paddles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-28-2012, 03:13 AM	#4
nicthepic Registered Users Join Date: Feb 2010 Location: europe	OK, i found them, remebar this, when you start with test program on CF, do not put the switch in upgrade mode!!!