START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
500 Class Electric Helicopters 500 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
01-03-2008, 05:35 PM | #1 (permalink) |
Registered Users
Join Date: Apr 2007
|
My T500 Setup
I am planning on using the following setup on my T500.
Cyclic Servos : Hitech HS5245MG Gyro : Futaba 401 Tail Servo : Futaba 9257 Lipos : 2 X FP EVO25 3S 2170 Rx : AR 7000 Is the above setup ok? I read that hitech servos are not that good and the case breaks easily, is it true? I want to get 5245MG because they are metal gear. Also i am going with 401 because i have used it before on raptor 30 and Trex 450 and its almost plug and play. Appreciate your suggestions/input. Thanks |
Sponsored Links | |||
Advertisement |
|
01-03-2008, 05:38 PM | #2 (permalink) |
Join Date: Mar 2007
|
i have that servos in my t500 with 20 flights or so and handle great so you should be good to go
|
01-03-2008, 07:29 PM | #3 (permalink) |
Team Taco VP
|
Same setup Kevin and I are running too with NO problems. I see no issues with the case breaking at all either.
Bob
__________________
"Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco! |
Thread Tools | |
Display Modes | |
|
|