AR7200BX & Trex 500EFL Pro....Very Nice!!

smaze17 · 07-28-2012, 08:09 PM

Just maidened my new 500 Pro from Performance Plus RC...thanks again Kirk!!!

-AR7200BX
-Align DS510's x 3
-Align DS520
-CC ICE 100 (governed - 2500, 2600, 2700)
-Align 500MX 1600kv
-Align DFC head
-Align 3G 425 mains
-Gens Ace 2600 6S

Really fun little heli, especially with the 7200

-Spence

Roger Palacio · 07-31-2012, 12:00 AM

Sweet !!!!

seefest · 08-12-2012, 08:09 PM

Looks good. Any reason you mounted the 7200 upside down instead of on the gyro pad? Reason I'm asking is I'm having vibration issues with my 7200 on the gyro pad.

DALE-PABAJO69 · 08-13-2012, 06:36 AM

is it normal for the AR7200BX after flying when you land for the swash plate to tilt to the left side?

seefest · 08-13-2012, 09:53 AM

Quote:

Originally Posted by DALE-PABAJO69

is it normal for the AR7200BX after flying when you land for the swash plate to tilt to the left side?

No, not normal. I'm having same issues.

sutty · 08-13-2012, 11:53 AM

How does it manifest in flight. If it performs correctly then this can be okay. Until I read Stefan's post I believed it was not normal as well.

See this post from Stefan from BeastX.

Or check out the whole thread here

Cheers

Sutty

07-28-2012, 08:09 PM	#1
smaze17 Registered Users My HF Map location Join Date: Feb 2011 Location: Calabasas, CA	AR7200BX & Trex 500EFL Pro....Very Nice!! Just maidened my new 500 Pro from Performance Plus RC...thanks again Kirk!!! -AR7200BX -Align DS510's x 3 -Align DS520 -CC ICE 100 (governed - 2500, 2600, 2700) -Align 500MX 1600kv -Align DFC head -Align 3G 425 mains -Gens Ace 2600 6S Really fun little heli, especially with the 7200 -Spence Attached Thumbnails __________________ Compass 7HV / AR7200BX / CC ICE2 80HV / Align 700MX / Edge 693FBL Trex 700 Pro / iKON / CC EDGE 120HV / Align 800MX / 3G 700's KDE Blinged Blade 130X

07-31-2012, 12:00 AM	#2
Roger Palacio Registered Users Join Date: May 2008 Location: GA, USA	Sweet !!!! __________________ Align T-Rex Family Owner - MicrobeastX - 7200BX 450 PROV2 DFC, 500E DFC, 500(Airwolf) Four Blades, 550E DFC, 600N FBL OS55HZ, 700N DFC 105HZ-R, 700E DFC HK4525-520LE To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-13-2012, 11:53 AM	#6
sutty Registered Users My HF Map location Join Date: Feb 2008 Location: Manchester, England	How does it manifest in flight. If it performs correctly then this can be okay. Until I read Stefan's post I believed it was not normal as well. See this post from Stefan from BeastX. Or check out the whole thread here Cheers Sutty __________________ Regards, Sutty BeltEXI, mCX, mSR, 4G3, FBL Trex250SE µB, FBL Trex450Pro µB, FBL Trex550e VX1, FBL Trex600ESP µB, Parkzone P51D

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2012, 08:09 PM	#3
seefest Registered Users Join Date: May 2012 Location: South Dartmouth, Ma.	Looks good. Any reason you mounted the 7200 upside down instead of on the gyro pad? Reason I'm asking is I'm having vibration issues with my 7200 on the gyro pad.

08-13-2012, 06:36 AM	#4
DALE-PABAJO69 Registered Users Join Date: Feb 2011 Location: THE ENCHANTED I island	is it normal for the AR7200BX after flying when you land for the swash plate to tilt to the left side?