Register Now

HeliBouncer · 12-26-2006, 06:51 AM

Has anyone setup their 9c to run with this sim? If so did, can you share your setup? I'm having a hard time getting all of the channels to work correctly with the helis'.

Pinecone · 12-26-2006, 09:46 AM

You need to set up a non-CCPM model to make it work. Just setup throttle and pitch curves.

And truthfully you don't need a Normal mode, just start in Idle Up, no worries about stripping gears. I do use throttle hold for autos though.

HeliBouncer · 12-26-2006, 07:26 PM

Thanks Pinecone, works for now.

Ade_Law · 12-31-2006, 02:27 PM

i use normal mode for flying fixed wing

with an 100, 75, 50, 75, 100 throttle curve in idle up 2

Ade

12-26-2006, 06:51 AM	#1 (permalink)
HeliBouncer Registered Users Join Date: May 2006	Phoenix HELP Has anyone setup their 9c to run with this sim? If so did, can you share your setup? I'm having a hard time getting all of the channels to work correctly with the helis'.

12-26-2006, 09:46 AM	#2 (permalink)
Pinecone Registered Users Join Date: Sep 2006	You need to set up a non-CCPM model to make it work. Just setup throttle and pitch curves. And truthfully you don't need a Normal mode, just start in Idle Up, no worries about stripping gears. I do use throttle hold for autos though. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

12-31-2006, 02:27 PM	#4 (permalink)
Ade_Law Registered Users Join Date: Nov 2005	i use normal mode for flying fixed wing with an 100, 75, 50, 75, 100 throttle curve in idle up 2 Ade __________________ adrian@accurcsimulator.com Direct Email support@accurcsimulator.com AccuRC Support https://discord.gg/ftCKT8U AccuRC Discord Server

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-26-2006, 07:26 PM	#3 (permalink)
HeliBouncer Registered Users Thread Starter Join Date: May 2006	Thanks Pinecone, works for now.

Register Now

Log-in