Walkera V450D03

[Blackhawk Crew]

Since there is still no category for this heli, I'll post here.

A few questions. I just ordered my V450D03 from Banggood. I assume it'll arrive in the next two weeks.

I'm looking at ordering spare parts. This is my spare parts list. It's based on what I've broken on my helis in the past. Can you tell me if this is a good list or what's missing?

Canopy
Tail Blades
Main Blades
Landing Skids
Main Gear
Tail Boom
Fin Set

Next...blades.

I like the stock blades. For the $20 they seem reasonable. However, Align and Tarot have a nice set of Yellow/Black that would match the tail blades quite well and they're cheaper. Specs for each are listed. Does anyone know if these will fit OK? Also, is weight a concern. I don't know the weight of the stockers, and 61g to 44g is a bit of a difference.

Align:
●Length: 325X32mm
●Width: 4.5mm
●Shaft Diameter: 3mm
●Weight: 61g/set

Tarot:
●Length: 325X32mm
●Width: 5mm
●Shaft Diameter: 3mm
●Weight: 44g/set

[ticojon]

I was wondering the same thing...

[Andre LaFramboise]

get a couple of belts and a tail assembly, feathering shafts I found the frame, canopy,landing gear pretty tough. The total heli is great but mine the belt wore and tail slipped, after taking apart you will find this hard plastic pcs inside boom. I think it is belt fibers that heat up and harden. Just got new parts from hobbycart only took a week,now to figure out how to change the belt.

[Big Air]

I have flown mine with the Align yellow and black blades. They work fine. I do prefer the stock blades so I normally fly with them and keep the Aligns as spares.

[Andre LaFramboise]

just weighted the set of stock blades and they are 44grams a set.

[stevebtx12]

For the price, get some spare servo linkages as well, I was grounded once after losing one on a heli.

[ticojon]

Originally Posted by Blackhawk Crew

Since there is still no category for this heli, I'll post here.

A few questions. I just ordered my V450D03 from Banggood. I assume it'll arrive in the next two weeks.

I'm looking at ordering spare parts. This is my spare parts list. It's based on what I've broken on my helis in the past. Can you tell me if this is a good list or what's missing?

Canopy
Tail Blades
Main Blades
Landing Skids
Main Gear
Tail Boom
Fin Set

Next...blades.

I like the stock blades. For the $20 they seem reasonable. However, Align and Tarot have a nice set of Yellow/Black that would match the tail blades quite well and they're cheaper. Specs for each are listed. Does anyone know if these will fit OK? Also, is weight a concern. I don't know the weight of the stockers, and 61g to 44g is a bit of a difference.

Align:
●Length: 325X32mm
●Width: 4.5mm
●Shaft Diameter: 3mm
●Weight: 61g/set

Tarot:
●Length: 325X32mm
●Width: 5mm
●Shaft Diameter: 3mm
●Weight: 44g/set

Where do you get the stock blades for $20?