Register Now

HW911 · 01-19-2017, 11:08 AM

It fly's around fine in Attitude mode quick response on inputs. When I switch to 3d mode it is very mushy and slow response I tried beginner mode and experienced mode with the same result via the app.It is actually hard to control it is so slow nothing like my other heli's. I just fly around no 3d yet. What settings should I try to tweak first in the app? I only set pitch and throttle curves for idle up's on my transmitter and dual rates. The app is used for everything else correct?

Thanks in advance

bloom691 · 01-19-2017, 08:28 PM

I have the same problem.... looking forward to an answer!

starryalley · 01-19-2017, 08:29 PM

Please just try the expert setting in cyclic and use some expo on your TX. I'm not so good at 3D I can just fly around inverted but I also found "experienced" and "beginner" setting are way too slow.

krauley · 01-20-2017, 12:05 PM

you have you atitude switch backwards man. your trying to fly in atitude mode and you think your in 3d mode. your backwards. how is that not obvious to you?

HW911 · 01-20-2017, 03:17 PM

Quote:

Originally Posted by krauley

you have you atitude switch backwards man. your trying to fly in atitude mode and you think your in 3d mode. your backwards. how is that not obvious to you?

Absolutely not.

Great answer Thanks

HW911 · 01-20-2017, 07:57 PM

Got it a little better. Raised gain slightly and raised cyclic accuracy to 60. It seems to have a little more snap to cyclic stop. Also raised cyclic response to 55. Will tinker a bit more when charged.

Other issue is getting used to this tiny thing. Big difference from a 450L and nitros.

Thanks again

RyanRC700 · 02-02-2017, 12:42 PM

Just another thing to check.

I actually found with mine the reporting back of the switching action for the modes being shown in the app was not actually switching the mode on the helo.

Basically I thought I was in 3D because the app via its info said I had the gain adjusted right with the switching, but I actually wasn't

To be sure you really need to look at the lights on the board and about 3/4 into the manual there is a chart of what lights mean what.

prairie ville · 02-02-2017, 10:01 PM

Thought I would include this for clarity....

01-19-2017, 11:08 AM	#1 (permalink)
HW911 Registered Users Join Date: Mar 2016	150x Feels Mushy in 3D Mode It fly's around fine in Attitude mode quick response on inputs. When I switch to 3d mode it is very mushy and slow response I tried beginner mode and experienced mode with the same result via the app.It is actually hard to control it is so slow nothing like my other heli's. I just fly around no 3d yet. What settings should I try to tweak first in the app? I only set pitch and throttle curves for idle up's on my transmitter and dual rates. The app is used for everything else correct? Thanks in advance

01-19-2017, 08:28 PM	#2 (permalink)
bloom691 Registered Users Join Date: Jan 2015	I have the same problem.... looking forward to an answer! __________________ Synergy 766 -- Align 500L -- Blade 180CFX -- Align 150X

01-20-2017, 12:05 PM	#4 (permalink)
krauley Registered Users Join Date: Oct 2011	you have you atitude switch backwards man. your trying to fly in atitude mode and you think your in 3d mode. your backwards. how is that not obvious to you? __________________ UH-60 EXI 500 DFC/3GX v5.0 ICE 75 Bec Pro w/4 blade main & tail rotors Align trex 500DFC Pro w/AR7210bx Oxy 2 FE micro Ikon2 Talon 25 BA 8-1 servos Oxy 3 Tareq Edition AR7210bx Edge lite 50 Kst 215's PL6 w/Bump Controller-24v PS DX8 gen2

02-02-2017, 10:01 PM	#8 (permalink)
prairie ville Registered Users Join Date: Mar 2011	Thought I would include this for clarity.... Attached Thumbnails __________________ DX8 GEN 1, Phoenix R/C 5.5 ,Hyperion 720i DUO w/ MW 600 PS,Trex 250 se, Trex 150X, mCPXv1, mSRX, mSR, Walkera 4G#6S , Blade SR, Trex 470LM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-19-2017, 08:29 PM	#3 (permalink)
starryalley Registered Users Join Date: Nov 2012	Please just try the expert setting in cyclic and use some expo on your TX. I'm not so good at 3D I can just fly around inverted but I also found "experienced" and "beginner" setting are way too slow.

01-20-2017, 07:57 PM	#6 (permalink)
HW911 Registered Users Thread Starter Join Date: Mar 2016	Got it a little better. Raised gain slightly and raised cyclic accuracy to 60. It seems to have a little more snap to cyclic stop. Also raised cyclic response to 55. Will tinker a bit more when charged. Other issue is getting used to this tiny thing. Big difference from a 450L and nitros. Thanks again

02-02-2017, 12:42 PM	#7 (permalink)
RyanRC700 Registered Users Join Date: Dec 2016	Just another thing to check. I actually found with mine the reporting back of the switching action for the modes being shown in the app was not actually switching the mode on the helo. Basically I thought I was in 3D because the app via its info said I had the gain adjusted right with the switching, but I actually wasn't To be sure you really need to look at the lights on the board and about 3/4 into the manual there is a chart of what lights mean what.

Register Now

Log-in