START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
2.4G Spektrum Radios Spektrum 2.4 Gigahertz Radios and Technology |
|
LinkBack | Thread Tools | Display Modes |
11-16-2015, 01:43 PM | #1 (permalink) |
Registered Users
Join Date: May 2014
|
weird message at shut down. dx9
good night.. I bought this radio a short time, not even flew it. today when I turned off the radio before it shut down, the serial number page appeared and now every time I turn on and off always appears that page, which is for four seconds and only then does the radio turn off. but untill yesterday this page does not appear and the radio turn off normally. is my rádio broken ?can you help me? thank you. dx9
|
Sponsored Links | |||
Advertisement |
|
11-16-2015, 03:57 PM | #2 (permalink) |
Registered Users
Join Date: Mar 2015
|
Have you added your name. Registration details by any chance?
My friends does that since he did. Mine doesn't and I haven't added mine. |
11-16-2015, 04:31 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: May 2014
|
Yes.I put my Name.and my Name appear on the screen too.my tx have the 1.06 airware. Tomorrow I will remove my Name and if the issue stay I will try to flash the 1.07 newer.thank you for your reply
|
11-17-2015, 04:52 PM | #4 (permalink) |
Registered Users
Join Date: Jun 2008
|
I think what he was trying to ask if if you have Registered and Updated it at least once? I think you are referring to the "nag screen" that prods you to go to the website and update it to the current Airware(AW).
Once you register it and update the screen goes away and it powercycles normally without the nag screen.
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
11-18-2015, 05:12 AM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: May 2014
|
good morning guys. I tried to remove my nome from program, but not working at all. so I put a newer version 1.09 and then is working fine, no problem. but at first I tried to use a 128mb card spektrum, but is not ok, I used a kingston 8GB and is beatifully. thank you for your help.
|
Thread Tools | |
Display Modes | |
|
|