Register Now

nosler130 · 09-05-2006, 03:40 PM

Ordered one today :cool: here in about 4 weeks or so..
Planning using :-
611 gyro
3 no 9351
1 no 9202
os 90sz
sab 710
sab 105
JR sc
spcm 9
rev lock 20

Can any one tell me which muffler will bolt straight on...
Should i pumped motor or not ?????if so why if not why????????
:?: :?:

robgt · 09-05-2006, 04:06 PM

I'm led to believe that 105 paddles are overkill and that 90's are a better choice.
Thats apparently what Alan is using??

Stick a Muscle pipe on it!

No idea about pumped or not...

Where have you ordered yours from?
Cheers,
Rob

dogg5306 · 09-05-2006, 04:26 PM

Hatori 938!!!!!
nuff said! :twisted:

asong26 · 09-05-2006, 05:27 PM

Man, I wish I had one. Where did you order yours from? Will they ship international?

dogg5306 · 09-05-2006, 05:57 PM

Be patient... I supposed that the 1st batch will be provided to dealers (demo purposes), team pilots, and the ones who will be very quick in the US then the following ones will be provided to overseas markets.

So you should be among the first ones to get it...

I hope that I'll be able to fly it very soon on Reflex XTR to calm me down

asong26 · 09-05-2006, 07:30 PM

I sure hope so. I am planning to get the OS engine as recommended. I may even get a second kit to experiment (Gasoline, or Diesel engine) :twisted:

asong26 · 09-06-2006, 01:06 AM

Quote:

Originally Posted by robgt

I'm led to believe that 105 paddles are overkill and that 90's are a better choice.
Thats apparently what Alan is using??

Stick a Muscle pipe on it!

No idea about pumped or not...

Where have you ordered yours from?
Cheers,
Rob

As long as it doesn't adversely impact the performance, I don't see any issues with overkill. I can't wait to see it!

nosler130 · 09-06-2006, 11:34 AM

:cool:
I have ordered one from Midlands Heli, Trevor reckons they are due 60 of them in , in about 4 weeks...

Does the Hatori 938 bolt straight on to this heli ???? as i read somewhere it may be to close to the tank???

JJ

robgt · 09-06-2006, 07:39 PM

Quote:

As long as it doesn't adversely impact the performance, I don't see any issues with overkill.

Augusto has this to say on the subject...
----------------------------
Paddle action is proportional to the paddle size but also and most importantly it's proportional to the flybar length because it determines the perimeter air speed on the paddle. The Aurora uses 555mm flybar so 105mm paddles are excessively large.
----------------------------

Which is a bit of a swine as I happen to have just purchased some 105's for mine (when i get it...) so, ahem, anyone want to buy a brand new set of V Paddles - M4 by 105mm

Besides, if they're (95's) good enough for Alan, Danny and Steven, then I think they'll do for me

Cheers,
Rob

Brian James · 09-07-2006, 05:16 PM

sell em to someone with a raptor 90. The 95's are slow for the r90.

nosler130 · 09-08-2006, 01:32 AM

Hi all ,
when i said in my list that i was planning "sab 105" i did mean TAIL BLADES....

Brian James · 09-08-2006, 09:15 AM

doh!!!

misio · 09-09-2006, 09:47 AM

my friend got his yesterday and did an all night build. Sweet looking heli i must admit.

dogg5306 · 09-09-2006, 09:54 AM

Lucky him

asong26 · 09-09-2006, 10:05 PM

How did he get it? Is he on the Avant team, or one of those 'special' customers?

robgt · 09-11-2006, 03:39 PM

I was at the North Notts fly-in this weekend and Steven Gerrard was there with his Aurora.
It's a stunning machine and wow is it light!
I think he was having some issues with a vibration on it somewhere, but he still managed to fly it in his usual awesome style.

A joy to watch, as ever.

I want one even more now

Cheers,
Rob

nosler130 · 09-18-2006, 01:59 PM

Hi all

need some info on root size as i am trying to order blades (for the AURORA)

Planning V Blade mains 690, V Blade tails 105, 90 mm V Blade paddles..

Root size?????

Bolt size ??????

Cheers

JJ

dogg5306 · 09-18-2006, 02:37 PM

14mm for root and 5mm for bolt :wink:

nosler130 · 09-18-2006, 02:49 PM

:glasses2:
Cheers dogg5306,
i am now of to find some...

Cheers JJ

zflarez · 09-22-2006, 02:31 AM

I know this is off topic but didn't feel it was necessary to make a new post for a quik answer. Is the aurora manufactured in the US or is it imported.

09-05-2006, 03:40 PM	#1 (permalink)
nosler130 Registered Users Join Date: May 2006	I have only gone and ordered one????? Ordered one today :cool: here in about 4 weeks or so.. Planning using :- 611 gyro 3 no 9351 1 no 9202 os 90sz sab 710 sab 105 JR sc spcm 9 rev lock 20 Can any one tell me which muffler will bolt straight on... Should i pumped motor or not ?????if so why if not why???????? :?: :?:

09-05-2006, 04:06 PM	#2 (permalink)
robgt Registered Users Join Date: May 2006	I'm led to believe that 105 paddles are overkill and that 90's are a better choice. Thats apparently what Alan is using?? Stick a Muscle pipe on it! No idea about pumped or not... Where have you ordered yours from? Cheers, Rob __________________ Team Thunder Tiger, Midland Helicopters, Optifuel, Spin Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

09-05-2006, 04:26 PM	#3 (permalink)
dogg5306 Registered Users My HF Map location Join Date: Mar 2006	Hatori 938!!!!! nuff said! :twisted: __________________ Miniature Aircraft Stratus 2*Hirobo Turbulence D3 EX Henseleit TDR Mikado Logo 600 3D

09-05-2006, 05:57 PM	#5 (permalink)
dogg5306 Registered Users My HF Map location Join Date: Mar 2006	Be patient... I supposed that the 1st batch will be provided to dealers (demo purposes), team pilots, and the ones who will be very quick in the US then the following ones will be provided to overseas markets. So you should be among the first ones to get it... I hope that I'll be able to fly it very soon on Reflex XTR to calm me down __________________ Miniature Aircraft Stratus 2*Hirobo Turbulence D3 EX Henseleit TDR Mikado Logo 600 3D

09-06-2006, 11:34 AM	#8 (permalink)
nosler130 Registered Users Thread Starter Join Date: May 2006	:cool: I have ordered one from Midlands Heli, Trevor reckons they are due 60 of them in , in about 4 weeks... Does the Hatori 938 bolt straight on to this heli ???? as i read somewhere it may be to close to the tank??? JJ __________________ Sab Goblin 570 KSE ,Sab Goblin 500 sport,Trex 450 , blade 180cfx X 2 :-)

09-05-2006, 05:27 PM	#4 (permalink)
asong26 Join Date: Sep 2006	Man, I wish I had one. Where did you order yours from? Will they ship international?

09-05-2006, 07:30 PM	#6 (permalink)
asong26 Join Date: Sep 2006	I sure hope so. I am planning to get the OS engine as recommended. I may even get a second kit to experiment (Gasoline, or Diesel engine) :twisted:

09-07-2006, 05:16 PM	#10 (permalink)
Brian James Registered Users Join Date: Mar 2006	sell em to someone with a raptor 90. The 95's are slow for the r90. __________________ Zeal Rotor Blades Team Horizon Hobby

09-08-2006, 01:32 AM	#11 (permalink)
nosler130 Registered Users Thread Starter Join Date: May 2006	Hi all , when i said in my list that i was planning "sab 105" i did mean TAIL BLADES.... __________________ Sab Goblin 570 KSE ,Sab Goblin 500 sport,Trex 450 , blade 180cfx X 2 :-)

09-08-2006, 09:15 AM	#12 (permalink)
Brian James Registered Users Join Date: Mar 2006	doh!!! __________________ Zeal Rotor Blades Team Horizon Hobby

09-09-2006, 09:47 AM	#13 (permalink)
misio My HF Map location Join Date: Sep 2004	my friend got his yesterday and did an all night build. Sweet looking heli i must admit.

09-09-2006, 09:54 AM	#14 (permalink)
dogg5306 Registered Users My HF Map location Join Date: Mar 2006	Lucky him __________________ Miniature Aircraft Stratus 2*Hirobo Turbulence D3 EX Henseleit TDR Mikado Logo 600 3D

09-09-2006, 10:05 PM	#15 (permalink)
asong26 Join Date: Sep 2006	How did he get it? Is he on the Avant team, or one of those 'special' customers?

09-11-2006, 03:39 PM	#16 (permalink)
robgt Registered Users Join Date: May 2006	I was at the North Notts fly-in this weekend and Steven Gerrard was there with his Aurora. It's a stunning machine and wow is it light! I think he was having some issues with a vibration on it somewhere, but he still managed to fly it in his usual awesome style. A joy to watch, as ever. I want one even more now Cheers, Rob __________________ Team Thunder Tiger, Midland Helicopters, Optifuel, Spin Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

09-18-2006, 01:59 PM	#17 (permalink)
nosler130 Registered Users Thread Starter Join Date: May 2006	Hi all need some info on root size as i am trying to order blades (for the AURORA) Planning V Blade mains 690, V Blade tails 105, 90 mm V Blade paddles.. Root size????? Bolt size ?????? Cheers JJ __________________ Sab Goblin 570 KSE ,Sab Goblin 500 sport,Trex 450 , blade 180cfx X 2 :-)

09-18-2006, 02:37 PM	#18 (permalink)
dogg5306 Registered Users My HF Map location Join Date: Mar 2006	14mm for root and 5mm for bolt :wink: __________________ Miniature Aircraft Stratus 2*Hirobo Turbulence D3 EX Henseleit TDR Mikado Logo 600 3D

09-18-2006, 02:49 PM	#19 (permalink)
nosler130 Registered Users Thread Starter Join Date: May 2006	:glasses2: Cheers dogg5306, i am now of to find some... Cheers JJ __________________ Sab Goblin 570 KSE ,Sab Goblin 500 sport,Trex 450 , blade 180cfx X 2 :-)

09-22-2006, 02:31 AM	#20 (permalink)
zflarez Join Date: Aug 2006	I know this is off topic but didn't feel it was necessary to make a new post for a quik answer. Is the aurora manufactured in the US or is it imported.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in