Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 130X


130X Blade 130X Helicopters Information and Help


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-14-2012, 12:22 PM   #1
tntburnett
Blade Forum Support
 
Posts: 3,662
 

Join Date: Feb 2009
Location: charlotte nc
Default Things to check when buying the 130x new before 1st flight and go to forums

OK there have been a lot of people having good luck with this lil guy right out of the box and some having trouble right out of the box. So it looks like those who are having good luck out of this lil it was made on Tuesday thru Thursday and for those that is having issues theirs was made on a Friday and Monday (just a lil humor). Treat it like if you would a bigger heli mostly pre assembly heli (trex 450) or RTF ( blade 450) . So here is the list

1. Check feathering shaft for tightness and lock tight also check tail grips
2. Check blades for tightness they are to loose out of the box ( mains and tail)
3. Check gear mesh on A &B gear meaning making sure its not tight against round part of B gear and also pressed against the gear ( boom could be to close in or TT could be install backwards)
4. Make sure the A gear is not touching servo (mosfit) use a piece of paper to check this. if A gear is touching lightly sand A gear.
5. Check TT at C gear make sure the TT is not touching the tail shaft shelve that can cause vibes also if so just cut extra off .
6. Then test fly if you have a wag or bounce change gyro settings here is the forum for this and it is a sticky. http://www.helifreak.com/showthread.php?t=429592

Here are a few forums you could go by and a few mods you can do to make this lil guy your best friend

(If I forgot anything please add to it)

Hope this help everybody out

PS this is not a beginner heli you can't jump from a coaxial or jump on this heli for a beginner heli. start with maybe the msrx so you can at least get the feel of fbl and movement and orientations then move your way up.

Be blessed
Isaac

http://www.helifreak.com/showthread.php?t=434396

http://www.helifreak.com/showthread.php?t=434332

http://www.helifreak.com/showthread.php?t=434482

http://www.helifreak.com/showthread.php?t=433279

http://www.helifreak.com/showthread.php?t=434528

http://www.helifreak.com/showthread.php?t=434139

http://www.helifreak.com/showthread.php?t=433662

http://www.helifreak.com/showthread.php?t=430910

http://www.helifreak.com/showthread.php?t=435991





Sent from my A100 using Tapatalk 2
__________________
Jesus Rep Its all Good,Its all GOD
FPV Everything Now
GOD BLESS

Last edited by tntburnett; 07-22-2012 at 01:38 PM..
tntburnett is offline        Reply With Quote
 




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 130X


130X Blade 130X Helicopters Information and Help

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Copyright © 2004-2016 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.